Wells WV-2SHGRW, WV-2HG Drawer Warmer Cleaning Instructions, Precautions, Frequency, Tools

Page 23

CLEANING INSTRUCTIONS (continued)

DRAWER WARMER CLEANING INSTRUCTIONS

PRECAUTIONS:

Turn control knob to OFF.

 

Allow drawers to cool before proceeding.

 

Remove drawer pans and Humitrol racks.

FREQUENCY:

Minimum -Daily

TOOLS:

Warm water and mild detergent

 

Clean cloth or sponge

1.Remove drawers from warmer:

a.Pull warmer drawer out until fully extended.

b.Slide finger along left and right slide rail until you reach the latches (located at the front end of the cabinet-mounted rails) Press down on both left and right latch.

c.Pull drawer away from warmer.

2.Clean drawers, drawer pans, Humitrol Racks and/or insets with warm water and mild detergent.

Rinse all components thoroughly with clear water.

Dry all components prior to reinstalling them in warmer.

3.Sweep crumbs and other debris from warmer cavity.

4.Clean the outside of the unit by wiping with a clean cloth or sponge, warm water and mild detergent. Dry with a clean cloth, then wipe with a polish formulated for stainless steel.

5.It is important to keep the slide rails clear and free from debris. Periodic cleaning of the slide rails and other adjoining parts is necessary to assure smooth drawer operation.

6.Check drawer rollers. Be sure they roll freely and that the slide rails are free from debris.

7.Be sure cabinet-mounted drawer catch roller is “up”, then re- install drawers.

CAUTION:

ELECTRIC SHOCK

HAZARD

Disconnect appliance from electric power before cleaning.

CAUTION:

HOT SURFACE

Exposed surfaces can be hot to the touch and may cause burns.

Allow appliance to cool before cleaning.

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Important do not Discard this Manual WV-2HG Series WV-2HGRW WV-2SHG WV-2SHGRWLimited Warranty Statement Introduction Table of ContentsSpecifications Features & Operating Controls Description Comment Ventilator SectionFeatures & Operating Controls Optional Drawer Warmer Section Ventilator Section ControlsGriddle Section Hotplate SectionElectric Shock Hazard Precautions and General InformationFire Hazard HOT Surface Risk DamageSTD Agency Listing InformationOperational Notes Unpacking & Inspection InstallationSetup This is Responsibility Installer Electric Shock Hazard Service Technician Installation NotesElectrical Installation Authority Having Jurisdiction Fire Suppression System InstallationFilter Installation Filters InstallationDo not Operate Unless the Grease Drip Tray is Installed Grease Drip Tray InstallationInstall Cooking Appliance Components PRE-FILTER Element OperationVentilator Operation Chrome Plated Griddles Using the GriddleGriddle Operation Preparing the Griddle Surface Seasoning Standard GriddlesCooking Recommendations Hotplate OperationGeneral Operational Notes OperationHeating Options Drawer Warmer Operation when providedPreparation Cleaning InstructionsVentilator Section Cleaning Instructions CleaningHotplate Section Cleaning InstructionsHeat and Smoke Hazard Griddle Cleaning InstructionsPrecautions Electrical Shock HazardTools Drawer Warmer Cleaning InstructionsPrecautions FrequencyDrawer Warmer Adjustments and Lubrication Maintenance InstructionsSymptom Possible Cause Recommended Remedy Troubleshooting SuggestionsAnsul Health Hazards Page Page Fire Hazard Maintenance SchedulesParts & Service Description Service

WV-2SHGRW, WV-2HGRW, WV-2HG, WV-2SHG specifications

Wells is a renowned name in the world of water heaters, known for its innovative technology and high-quality products. Among its impressive lineup, the WV-2SHG, WV-2HG, WV-2HGRW, and WV-2SHGRW models stand out, each offering unique features and benefits designed to meet diverse consumer needs.

The Wells WV-2SHG is a high-efficiency water heating solution tailored for modern households. Its design emphasizes energy conservation without sacrificing performance. Equipped with dual heating elements, it ensures faster heating times and consistent water temperature, making it suitable for homes with high demand for hot water. The model also incorporates advanced insulation, reducing heat loss and improving energy efficiency.

Similar to the WV-2SHG, the WV-2HG focuses on efficiency and reliability, but with a more streamlined design. This model simplifies installation and maintenance, making it a popular choice for both homeowners and professionals. It features a state-of-the-art electronic control system, allowing for precise temperature management and user-friendly operations. The WV-2HG's compact size also makes it an ideal choice for smaller spaces without compromising on performance.

The WV-2HGRW enhances functionality with its built-in recirculation system. This unique feature allows for instant access to hot water, drastically reducing wait times for users. The recirculation system is particularly beneficial for larger households, ensuring that multiple faucets can draw hot water simultaneously without significant drops in temperature or pressure. Additionally, this model’s energy-efficient technology helps to lower utility bills while providing consistent hot water.

Lastly, the WV-2SHGRW combines the best features from its predecessors while introducing advanced smart technology. With Wi-Fi connectivity, users can control and monitor their water heater remotely via a smartphone app. This model also boasts enhanced safety features, including leak detection and automatic shut-off, providing peace of mind for homeowners. Its design focuses on sustainability, using eco-friendly materials and processes to minimize environmental impact.

In summary, the Wells WV-2SHG, WV-2HG, WV-2HGRW, and WV-2SHGRW are exemplary models that demonstrate Wells' commitment to innovation, efficiency, and user satisfaction. These water heaters showcase advanced technologies while catering to the evolving needs of modern households.
Top Page Image Contents