Unpacking & Inspection, Installation, Setup

UNPACKING & INSPECTION

Carefully remove the appliance from the carton. Remove all protective plastic film, packing materials and accessories from the Appliance before connecting electrical power or otherwise performing any installation procedure.

Carefully read all instructions in this manual and the Installation Instruction Sheet packed with the appliance before starting any installation.

Read and understand all labels and diagrams attached to the appliance.

Carefully account for all components and accessories before discarding packing materials. Store these components in or near the appliance for later use. These items must be installed before operating the appliance.

1 ea. FIRE SUPPRESSION AGENT (ANSULEX® Low pH, 1.5 GAL.) See Material Safety Data Sheet, page 28.

1 ea. FIRE SUPPRESSION MEDIA TANK

1 ea. FIRE SUPPRESSION TANK CHARGING CARTRIDGE

1 ea. GREASE BAFFLE

1 ea. FILTER PACK ASSEMBLY

1 ea. PRE-FILTER HOLDER with PRE-FILTER 1 ea. GREASE DRIP TRAY

1 ea. GREASE DRAWER ASSY FOR GRIDDLE

2 ea. 6” SIDE SPACERS

1 ea. LITERATURE PACKAGE Additionally:

2 ea. HOTPLATE DRIP PANS (spiral elements only)

2 ea. ELEMENT SUPPORTS (spiral elements only)

2 ea. DRAWER PANS (if unit has optional drawer warmers)

SETUP

Setup the appliance only on a firm level surface. Non-combustible material is recommended.

Refer to the Installation Instruction Sheet for required clearances. Maintain required clearances between the appliance and adjacent combustible surfaces. Verify 6” left and right side clearances to combustible construction. This appliance requires a minimum of 8 ft (96”) (floor to overhead) to allow for adequate exhaust.

IMPORTANT: Provided 6" side spacers (item 58) must be installed on the appliance.

Factory installed side shields (item 57) are required.

Verify that the VENTILATOR HOOD ASSEMBLY is properly and securely assembled to the cooking appliance before beginning the installation procedure.

If a remote manual pull station is to be installed, replace the rear casters with legs.

Level the unit after it is in its final position. Using a spirit level, verify that the unit is level front-to-back and side-to-side.

INSTALLATION

NOTE: DO NOT discard the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for proper operation.

Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual.

WARNING:

Risk of personal injury

Installation procedures must be performed by a qualified technician with full knowledge of all applicable electrical codes. Failure can result in personal injury and property damage.

WARNING:

Fire Hazard

Avoid storing flammable or combustible materials near the appliance.

WV-2SHGRW, WV-2HGRW, WV-2HG, WV-2SHG specifications

Wells is a renowned name in the world of water heaters, known for its innovative technology and high-quality products. Among its impressive lineup, the WV-2SHG, WV-2HG, WV-2HGRW, and WV-2SHGRW models stand out, each offering unique features and benefits designed to meet diverse consumer needs.

The Wells WV-2SHG is a high-efficiency water heating solution tailored for modern households. Its design emphasizes energy conservation without sacrificing performance. Equipped with dual heating elements, it ensures faster heating times and consistent water temperature, making it suitable for homes with high demand for hot water. The model also incorporates advanced insulation, reducing heat loss and improving energy efficiency.

Similar to the WV-2SHG, the WV-2HG focuses on efficiency and reliability, but with a more streamlined design. This model simplifies installation and maintenance, making it a popular choice for both homeowners and professionals. It features a state-of-the-art electronic control system, allowing for precise temperature management and user-friendly operations. The WV-2HG's compact size also makes it an ideal choice for smaller spaces without compromising on performance.

The WV-2HGRW enhances functionality with its built-in recirculation system. This unique feature allows for instant access to hot water, drastically reducing wait times for users. The recirculation system is particularly beneficial for larger households, ensuring that multiple faucets can draw hot water simultaneously without significant drops in temperature or pressure. Additionally, this model’s energy-efficient technology helps to lower utility bills while providing consistent hot water.

Lastly, the WV-2SHGRW combines the best features from its predecessors while introducing advanced smart technology. With Wi-Fi connectivity, users can control and monitor their water heater remotely via a smartphone app. This model also boasts enhanced safety features, including leak detection and automatic shut-off, providing peace of mind for homeowners. Its design focuses on sustainability, using eco-friendly materials and processes to minimize environmental impact.

In summary, the Wells WV-2SHG, WV-2HG, WV-2HGRW, and WV-2SHGRW are exemplary models that demonstrate Wells' commitment to innovation, efficiency, and user satisfaction. These water heaters showcase advanced technologies while catering to the evolving needs of modern households.