Wells 1222 1222CA owner manual Replace Heating Element, Replace Solenoid, Repair HOT Water Faucet

Page 13

SERVICING INSTRUCTIONS (continued)

REPLACE HEATING ELEMENT

Remove tank lid assembly as detailed on page 10.

Remove two hex nuts holding element to cover. Pull element from mounting holes.

Reassemble in reverse order.

REPLACE SOLENOID

Unplug power cord. Turn OFF and disconnect water supply from dispenser inlet fitting.

Remove rear panel. Remove two screws holding access door in place. Remove access door and solenoid. Unscrew inlet fitting cap to release solenoid from door. Remove wiring from solenoid.

Transfer fill tube from old solenoid to new solenoid. Reassemble in reverse order.

REPAIR HOT WATER FAUCET

Unplug power cord. Turn OFF water. Unscrew bonnet from faucet, then pull bonnet assembly from faucet body.

Examine the interior of the faucet body and the surface of the seat cup. Clean out any debris in the faucet body, using a stiff bristle brush if necessary.

If required, work the seat cup out of the bonnet and off of the end of the stem. Install a new seat cup, making sure the knob on the stem is fully inserted into the pocket of the seat cup, and the skirt of the seat cup is fully inserted into the bonnet

Reassemble in reverse order.

712 76580 Owners Manual Hot Water Dispenser

IMPORTANT:

When replacing heating element, also replace seal gaskets.

NOTE: Any abrasion or roughness on the flat end of the seat cup will require replacing the seat cup:

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 712 Warranty Statement Specifications Table of ContentsApplicability Features and Operating Controls Agency Listing Information Precautions and General InformationEquipment Damage Burn HazardPLUMBER’S Installation Instructions InstallationUnstable Equipment Hazard Refer to Exploded Views page 14 for Component NAMES/NUMBERSShock Hazard ELECTRICIAN’S Installation InstructionsWater Heater OperationWater Level START-UPFrequency Cleaning InstructionsTools Symptom Possible Cause Suggested Remedy Troubleshooting SuggestionsServicing Instructions Access PanelsRear Panel Solenoid DoorRemove Tank LID Assembly Temperature AdjustmentReplace Thermostat Replace Solenoid Replace Heating ElementRepair HOT Water Faucet Chemical Burn Hazard Procedure Delime the Water TankService Kits Exploded Views and Parts ListsFaucet Repair Kits Solenoid Repair Kits19 2 Reqd Description Model 1222 and 1222CA Wiring Diagram Genuin e Parts

1222 1222CA specifications

Wells 1222 1222CA represents a significant advancement in the realm of wastewater management and treatment solutions. Designed for both commercial and residential applications, this model epitomizes efficiency and reliability. It is engineered to meet the growing demand for sustainable practices in water management, addressing the complexities of wastewater through innovative technologies.

One of the hallmark features of the Wells 1222 1222CA is its advanced filtration system. The model employs a multi-stage filtration process, incorporating both mechanical and biological filtration to ensure that wastewater is treated thoroughly. The mechanical aspect utilizes fine mesh screens to capture larger particles and debris while the biological component promotes the growth of beneficial bacteria that help break down organic matter. This two-tier approach enables superior effluent quality, significantly reducing the potential for pollutants entering local water bodies.

In addition to its filtration capabilities, the Wells 1222 1222CA model includes state-of-the-art sensor technology. These sensors monitor parameters such as water levels, flow rates, and overall system performance. This real-time data collection allows for proactive maintenance and ensures that the system operates within optimal parameters. The integration of smart technology also facilitates remote monitoring and control, providing users with the ability to manage the system via a mobile application, adding convenience and enhancing operational efficiency.

The construction of the Wells 1222 1222CA is robust, utilizing high-quality, corrosion-resistant materials that ensure durability and longevity. This model is designed to withstand varying environmental conditions, making it suitable for diverse geographic locations. Furthermore, its compact size allows for easy installation in limited spaces, accommodating the needs of urban environments.

Another notable characteristic of the Wells 1222 1222CA is its energy-efficient design. By employing energy-saving technologies, the system minimizes its carbon footprint while still delivering optimal performance. This focus on sustainability is complemented by a user-friendly interface that simplifies operation for all users, ensuring that both novice and experienced operators can manage the system effectively.

Overall, the Wells 1222 1222CA offers an innovative solution for wastewater treatment, combining advanced filtration, smart technology, durable construction, and energy efficiency into one cohesive unit. This model not only meets regulatory standards but also promotes environmental stewardship, making it an invaluable asset for those dedicated to responsible water management practices.
Top Page Image Contents