Wells 1222 1222CA Precautions and General Information, Agency Listing Information, Burn Hazard

Page 5

PRECAUTIONS AND GENERAL INFORMATION

WARNING: ELECTRIC SHOCK HAZARD

All servicing requiring access to non-insulated components must be performed by qualified service personnel. Do not open any access panels which require the use of tools.

Failure to heed this warning can result in electrical shock.

WARNING: INJURY HAZARD

All installation procedures must be performed by qualified personnel with full knowledge of all applicable electrical and plumbing codes. Failure could result in property damage and personal injury.

WARNING: ELECTRIC SHOCK HAZARD

Hot Water Dispenser must be properly grounded to prevent possible shock hazard.

DO NOT assume a plumbing line will provide such a ground. Electrical shock will cause death or serious Injury.

WARNING: BURN HAZARD

This appliance dispenses very hot liquid. Serious bodily injury from scalding can occur from contact with dispensed liquids.

Manual Hot Water Dispenser

This appliance is intended for commercial use only.

This appliance is intended for use to dispense heated water. No other use is recommended or authorized by the manufacturer or its agents.

This appliance is intended for use in commercial establishments, where all operators are familiar with the appliance use, limitations and associated hazards. Operating instructions and warnings must be read and understood by all operators and users.

Except as noted, this piece of equipment is made in the USA and has American sizes on hardware. All metric conversions are approximate and can vary in size.

The following trouble shooting, component views and parts lists are included for general reference, and are intended for use by qualified service personnel.

This manual should be considered a permanent part of this appliance. The manual must remain with the appliance if it is sold or moved to another location.

CAUTION:

EQUIPMENT DAMAGE

DO NOT plug in or energize this appliance until all Installation Instructions are read and followed. Damage to the dispenser will occur if these instructions are not followed.

CAUTION:

BURN HAZARD

Dispensed liquid is VERY HOT and can cause burns.

CAUTION:

BURN HAZARD

Exposed surfaces of the appliance may be HOT to the touch and can cause burns.

712 76580 Owners

This dispenser is and listed under file E9253.

This dispenser meets Standard 4 only when installed, operated and maintained in accordance with the enclosed instructions.

AGENCY LISTING INFORMATION

E9253

E9253

STANDARD 4

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 712 Warranty Statement Applicability Table of ContentsSpecifications Features and Operating Controls Agency Listing Information Precautions and General InformationEquipment Damage Burn HazardPLUMBER’S Installation Instructions InstallationUnstable Equipment Hazard Refer to Exploded Views page 14 for Component NAMES/NUMBERSShock Hazard ELECTRICIAN’S Installation InstructionsWater Heater OperationWater Level START-UPTools Cleaning InstructionsFrequency Symptom Possible Cause Suggested Remedy Troubleshooting SuggestionsServicing Instructions Access PanelsRear Panel Solenoid DoorReplace Thermostat Temperature AdjustmentRemove Tank LID Assembly Repair HOT Water Faucet Replace Heating ElementReplace Solenoid Chemical Burn Hazard Procedure Delime the Water TankService Kits Exploded Views and Parts ListsFaucet Repair Kits Solenoid Repair Kits19 2 Reqd Description Model 1222 and 1222CA Wiring Diagram Genuin e Parts

1222 1222CA specifications

Wells 1222 1222CA represents a significant advancement in the realm of wastewater management and treatment solutions. Designed for both commercial and residential applications, this model epitomizes efficiency and reliability. It is engineered to meet the growing demand for sustainable practices in water management, addressing the complexities of wastewater through innovative technologies.

One of the hallmark features of the Wells 1222 1222CA is its advanced filtration system. The model employs a multi-stage filtration process, incorporating both mechanical and biological filtration to ensure that wastewater is treated thoroughly. The mechanical aspect utilizes fine mesh screens to capture larger particles and debris while the biological component promotes the growth of beneficial bacteria that help break down organic matter. This two-tier approach enables superior effluent quality, significantly reducing the potential for pollutants entering local water bodies.

In addition to its filtration capabilities, the Wells 1222 1222CA model includes state-of-the-art sensor technology. These sensors monitor parameters such as water levels, flow rates, and overall system performance. This real-time data collection allows for proactive maintenance and ensures that the system operates within optimal parameters. The integration of smart technology also facilitates remote monitoring and control, providing users with the ability to manage the system via a mobile application, adding convenience and enhancing operational efficiency.

The construction of the Wells 1222 1222CA is robust, utilizing high-quality, corrosion-resistant materials that ensure durability and longevity. This model is designed to withstand varying environmental conditions, making it suitable for diverse geographic locations. Furthermore, its compact size allows for easy installation in limited spaces, accommodating the needs of urban environments.

Another notable characteristic of the Wells 1222 1222CA is its energy-efficient design. By employing energy-saving technologies, the system minimizes its carbon footprint while still delivering optimal performance. This focus on sustainability is complemented by a user-friendly interface that simplifies operation for all users, ensuring that both novice and experienced operators can manage the system effectively.

Overall, the Wells 1222 1222CA offers an innovative solution for wastewater treatment, combining advanced filtration, smart technology, durable construction, and energy efficiency into one cohesive unit. This model not only meets regulatory standards but also promotes environmental stewardship, making it an invaluable asset for those dedicated to responsible water management practices.
Top Page Image Contents