Wells WM-TR II Installing or Removing Satellite Tank, Burn Hazard, General Guidelines

Page 11

M707 p/n 306692 OpManual WM-TR II

Water-Max II™ is used to dispense hot water for food preparation. The SATELLITE TANK stores five gallons of hot water for immediate use.

INSTALLING OR REMOVING SATELLITE TANK

Drain all water from SATELLITE before attempting to remove from unit. Press the HEATER SWITCH to OFF ( O )

Be sure the COVER is properly installed on the SATELLITE

Install or remove SATELLITE on Water-Max II™ shelf by lifting up on satellite faucet guard.

When installing the tank, make sure that the tank is properly positioned, that the connector is seated, and that the dispensing nozzle lowered into position in the satellite cover.

Press the HEATER SWITCH to ON ( I ). Amber REFILL light will glow and hot water will begin filling the satellite after 15 - 20 seconds.

Place an appropriate container under the faucet. Being careful not to overflow the container, pull the faucet handle to dispense hot water.

DISPENSE

 

 

NOZZLE

ON

OFF

 

 

HOT WATER

FAUCET

Fig. 5 Water-Max™ Operation

To Keep Water in Satellite Hot

Leave the heater switch ON. The satellite has an internal heater to maintain the tank temperature, and will remain ready to dispense hot water.

OPERATION

WARNING:

BURN HAZARD

Water-Max™ is designed to operate with a matching 5 gal. satellite water tank only.

Do not hold anything other than the matching satellite under the dispensing nozzle. Splashing hot water will cause serious burns.

GENERAL GUIDELINES

NEVER hold or place anything, other than the proper satellite, under the dispense nozzle. Draw water only from the hot water faucet of the satellite water tank.

NEVER attempt to remove or carry a satellite while full of water.

NEVER attempt to operate Water-Max II™ without the cover properly installed on the satellite

CAUTION:

Hot Surface

Exposed surfaces can be hot to the touch and may cause burns.

9

Image 11
Contents Important do not Discard this Manual WATER-MAX WM-TRM707 p/n 306692 OpManual WM-TR Introduction Description Adjustable LEGFeatures & Operating Controls M707 p/n 306692 OpManual WM-TR Installation Risk of Damage Plumbing Line ConnectionShock Hazard Electrical InstallationInstallation General Guidelines Installing or Removing Satellite TankBurn Hazard Equipment Damage Daily CleaningHOT Surfaces First AID Cleaning InstructionsBurn Hazard Cleaning Instructions Symptom Possible Cause Suggested Remedy M707 p/n 306692 OpManual WM-TR

WM-TR II specifications

The Wells WM-TR II is a high-performance commercial waffle maker designed to deliver exceptional quality waffles quickly and efficiently. This machine stands out in commercial kitchens, hotels, and restaurants thanks to its innovative design and robust functionality.

One of the main features of the Wells WM-TR II is its dual cooking plates, which allow for the simultaneous preparation of two waffles. This not only saves time but also enhances productivity, making it an ideal choice for busy establishments. Each cooking plate is made from durable, heavy-duty cast aluminum, ensuring even heat distribution and consistent waffle quality. The non-stick surface guarantees that waffles are easy to remove and helps reduce the amount of cooking oil needed, promoting a healthier cooking environment.

The thermostatic control feature of the WM-TR II allows users to easily set the desired cooking temperature, ensuring perfect browning and texture for every waffle. A built-in timer indicates when the waffles are ready, helping to eliminate guesswork and ensuring that each product meets exacting standards. This combination of precise temperature control and timing contributes significantly to the operational efficiency of the waffle maker.

Another significant characteristic of the Wells WM-TR II is its compact design, which maximizes countertop space without sacrificing performance. Its stainless steel construction provides durability and a sleek, professional look that fits seamlessly into any kitchen décor. The removable drip tray is another practical addition, as it simplifies cleanup and helps maintain a tidy workspace.

For operational safety, the WM-TR II features cool-touch handles, minimizing the risk of burns during the cooking process. The machine is also equipped with an indicator light that signals when the unit is heating and when it has reached the optimal cooking temperature.

In summary, the Wells WM-TR II waffle maker is a powerful and efficient appliance that combines advanced technology with user-friendly features. Its dual cooking plates, precise temperature control, and durable construction make it an excellent investment for any food service operation looking to provide high-quality waffles with ease. Whether used for breakfast services, dessert offerings, or unique culinary creations, the WM-TR II is designed to meet the demands of the modern kitchen while delivering delicious results.