Wells WM-TR II operation manual Plumbing Line Connection, Risk of Damage

Page 8

INSTALLATION (continued)

CAUTION:

RISK OF DAMAGE

DO NOT connect or energize this appliance until all Installation Instructions are read and followed. Damage to the dispenser will occur if these instructions are not followed.

IMPORTANT: Water supply MUST be a minimum of 1/4” line, and MUST be capable of supplying 25 p.s.i. AT ALL TIMES during the operation of the dispenser.

PLUMBING LINE CONNECTION

If power has been run to the dispenser, verify that the circuit breaker is turned OFF, and that the POWER SWITCH is in the OFF [O] position.

Water-Max II™ must be connected to a potable water supply. Connect to a cold water line only. Connecting to a hot water line will damage the inlet water valve.

NOTICE:

WATER PIPE CONNECTIONS AND FIXTURES DIRECTLY

CONNECTED TO A POTABLE WATER SUPPLY SHALL BE SIZED, INSTALLED AND MAINTAINED ACCORDING TO FEDERAL, STATE, AND LOCAL ORDINANCES.

Minimum 1/4” copper or flex tubing supply line (3/8” minimum if run from main supply exceeds 12 feet) with 1/4” female flare fitting.

Minimum 25 psi / maximum 75 psi water pressure at full flow.

The installation of a SHUTOFF VALVE (must be provided by plumbing installer) on the incoming water line is required. A 1/4 turn ball valve is recommended to minimize restricting the water flow during operation.

Installation of a PRESSURE REGULATOR and WATER HAMMER ARRESTOR (to be provided by plumbing installer) on the incoming water line is recommended.

Clean the incoming waterline: Run water through the line into a sink or bucket to flush any foreign particles or debris from the waterline.

Assemble incoming water line to the inlet fitting. Turn on water supply valve and check for leaks.

If a pressure regulator is installed, adjust pressure to 40 p.s.i.

M707 p/n

Fig. 3 1/4 Turn Ball Valve

306692 OpManual WM-TR II

6

Image 8
Contents WATER-MAX WM-TR Important do not Discard this ManualM707 p/n 306692 OpManual WM-TR Introduction Adjustable LEG DescriptionFeatures & Operating Controls M707 p/n 306692 OpManual WM-TR Installation Plumbing Line Connection Risk of DamageElectrical Installation Shock HazardInstallation General Guidelines Installing or Removing Satellite TankBurn Hazard Equipment Damage Daily CleaningHOT Surfaces Cleaning Instructions First AIDBurn Hazard Cleaning Instructions Symptom Possible Cause Suggested Remedy M707 p/n 306692 OpManual WM-TR

WM-TR II specifications

The Wells WM-TR II is a high-performance commercial waffle maker designed to deliver exceptional quality waffles quickly and efficiently. This machine stands out in commercial kitchens, hotels, and restaurants thanks to its innovative design and robust functionality.

One of the main features of the Wells WM-TR II is its dual cooking plates, which allow for the simultaneous preparation of two waffles. This not only saves time but also enhances productivity, making it an ideal choice for busy establishments. Each cooking plate is made from durable, heavy-duty cast aluminum, ensuring even heat distribution and consistent waffle quality. The non-stick surface guarantees that waffles are easy to remove and helps reduce the amount of cooking oil needed, promoting a healthier cooking environment.

The thermostatic control feature of the WM-TR II allows users to easily set the desired cooking temperature, ensuring perfect browning and texture for every waffle. A built-in timer indicates when the waffles are ready, helping to eliminate guesswork and ensuring that each product meets exacting standards. This combination of precise temperature control and timing contributes significantly to the operational efficiency of the waffle maker.

Another significant characteristic of the Wells WM-TR II is its compact design, which maximizes countertop space without sacrificing performance. Its stainless steel construction provides durability and a sleek, professional look that fits seamlessly into any kitchen décor. The removable drip tray is another practical addition, as it simplifies cleanup and helps maintain a tidy workspace.

For operational safety, the WM-TR II features cool-touch handles, minimizing the risk of burns during the cooking process. The machine is also equipped with an indicator light that signals when the unit is heating and when it has reached the optimal cooking temperature.

In summary, the Wells WM-TR II waffle maker is a powerful and efficient appliance that combines advanced technology with user-friendly features. Its dual cooking plates, precise temperature control, and durable construction make it an excellent investment for any food service operation looking to provide high-quality waffles with ease. Whether used for breakfast services, dessert offerings, or unique culinary creations, the WM-TR II is designed to meet the demands of the modern kitchen while delivering delicious results.