English
20
Troubleshooting
Your notebook PC is sturdy and subject to few problems in the field. However, you may
4.1 Identifying The Problem
If you encounter a problem, go through the following procedure before pursuing complex troubleshooting:
1.Turn off your notebook.
2.Make sure the AC adapter is plugged into your notebook and to an active AC power source.
3.Make sure that any card installed in the PC card slot is seated properly. You can also remove the card from the slot, thus eliminating it as a possible cause of failure.
4.Make sure that any devices connected to the external connectors are plugged in properly. You can also disconnect such devices, thus eliminating them as possible causes of failure.
5.Turn on your notebook. Make sure it has been off at least 10 seconds before you turn it on.
6.Go through the boot sequence.
7.If the problem has not been resolved, contact your support representative.
Before you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution:
●Product name
●Product configuration number
●Product serial number
●Purchase date
●Conditions under which the problem occurred
●Any error messages that have occurred
●Hardware configuration
●Type of device connected, if any
See the configuration label on the bottom of your notebook for configuration and serial numbers.
4.2 GIGABYTE Service Information
More service information please link to GIGABYTE official website: www.gigabyte.com
