INSTALLATION INSTRUCTIONS
A.UNPACKING AND INSPECTION
1.Carefully remove the GRIDDLE from the carton. Remove all protective plastic film, packaging materials and accessories from the GRIDDLE before connecting electrical power or otherwise performing any installation procedures.
NOTE: DO NOT discard the CARTON and other PACKAGING MATERIAL until you have inspected the warmer for hidden damage and tested it for PROPER OPERATION.
Refer to SHIPPING DAMAGE CLAIM PROCEDURE on page 1 of this manual.
2.Read all instructions in this manual carefully before starting installation of this griddle. READ AND UNDERSTAND ALL LABELS AND DIAGRAMS ATTACHED TO THE GRIDDLE.
3.Carefully account for all components and accessories before discarding packing materials. Store the accessories in a convenient place for later use:
B.INSTALLATION NOTES
1.Installation and start up of
2.It is the RESPONSIBILITY OF THE INSTALLER to verify that this griddle installation is in compliance with the specifications listed in this manual and on the specification sheet provided.
3.It is the RESPONSIBILITY OF THE INSTALLER to check with the AUTHORITY HAVING JURISDICTION, in order to verify that this griddle installation is in compliance with local code requirements.
C.BUILT-IN GRIDDLES
1.This is a GENERAL GUIDE. For specific cutout dimensions and other installation details, refer to the Installation Instructions supplied with the griddle.
2.Cutouts
a.Cutout dimensions for griddle and control panels are listed on the Installation Instructions provided with the griddle.
b.Verify griddle and control panel dimensions before making cutout.
c.Griddles must be installed in
3.Installation
a. Verify that provided sealants are applied to the underside of the top flange prior to setting the unit into the cutout.
b. After installation, verify that the tabs on the Wellsloks are turned out to lock the griddle into the counter.
c. Apply a thin bead of
NOTE: Damage caused by leaks due to improper installation is NOT covered by warranty.
4