DeLonghi DEIND604, DEIND603 manual Electrical Requirements, Connection of the Power Supply Cable

Page 10

ELECTRICAL REQUIREMENTS

■■ The appliance must be connected to the mains checking that the voltage correspon- ds to the value given in the rating plate and that the electrical cable sections can withstand the load specified on the plate.

■■ A suitable isolating switch providing full disconnection from the mains power supply shall be incorporated in the permanent wiring, mounted and positioned to comply with the local wiring rules and regulations. The isolating switch must be of an approved type and provide a 3 mm air gap contact separation in all poles (or in all active [phase] conductors if the local wiring rules allow for this variation of the requirements).

■■ The isolating switch shall be easily accessible to the customer with the cooktop installed.

■■ The power supply cable must not touch the hot parts and must be positioned so that it does not exceed 75°C above ambient.

■■ To connect the appliance to the mains electricity supply, do not use adapters, reducers or branching devices as they can cause overheating and burning.

N.B. The connection of the appliance to earth is mandatory.

If the installation requires alterations to the domestic electrical system call a qualified elec- trician. He should also check that the domestic electrical system is suitable for the power drawn by the appliance.

Replacing the power cord (not supplied with the appliance) must be done by a qua- lified electrician in accordance with the instructions supplied by the manufacturer and in compliance with established electrical regulations.

CONNECTION OF THE POWER SUPPLY CABLE

Important! This cooktop must be connected to the electricity supply only by an au- thorised person.

To connect the feeder cable to the hob it is necessary to carry out the following operations:

■■ Unhook the terminal board cover “A” by inserting a screwdriver into the two hooks “B” (fig. 7). Open completely the terminal block cover “A”.

■■ Unscrew the screw “C”, then unhook the cable clamp “D” by inserting a screwdriver into the hook “E”. Remove completely the cable clamp “D” (fig. 7).

■■ Connect the phase, neutral and earth wires to terminal board “F” according to the diagrams in fig. 8; the U bolts “G” (fig. 7) shall be used as indicated in the diagrams in fig. 8 (they are supplied already fitted to the terminals or inside the terminal board, behind the cover).

■■ Strain the feeder cable and block it with cable clamp “D” (by hooking hook “E” and screwing screw “C”).

■■ Close the cover “A” of the terminal board “F” (check the two hooks “B” are correctly hooked).

VOLTAGE AND POWER CONSUMPTION

Mod. DEIND603

 

 

 

 

220-240/380-415 V 3N~

50/60 Hz

6700 W

29.13 A

(diversity not applied)

Mod. DEIND604 - DEIND804

 

 

 

220-240/380-415 V 3N~

50/60 Hz

7400 W

32.17 A

(diversity not applied)

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents DE’LONGHI Dear Customer Product LabelImportant Precautions and Recommendations Page Other Important Precautions and Recommendations Installation Fitting RequirementsMod. DEIND604 Mod. DEIND603Mod. DEIND804 Oven with Cooling fanFastening the Cooktop Electrical Requirements Connection of the Power Supply CableVoltage and Power Consumption Connection of the appliance to earth is mandatoryFeeder Cable Section Electric Diagrams Electric Diagram KEY USE and Care Touch Controls HOW to USE the Cooking HOB Induction Cooking SystemRemaining Heat Indicators Cookware for Induction CookingSwitching on HOW to Switch ON/OFF the CooktopPower Ignition and Adjustment of a Cooking Zone Switching OFFBooster Function Important NotesOperation Time Limit of the Cooking Zones Cooking Zone Program for Automatic Switching OFF of a Cooking Zone Pause Mode Child Lock SafetyMaximum Usable Power for the Cooking Zones Thermal ProtectionsOr Ex not E2 or Error Codes on the Displays of the Cooking ZonesErxx DisplayAdvice for Safe USE of the HOB General Advice Cleaning the Ceramic HOBService and Maintenance Servicing the appliancePage Page Page Cod ß1

DEIND804, DEIND604, DEIND603 specifications

The DeLonghi DEIND603, DEIND604, and DEIND804 are innovative dehumidifiers that exemplify advanced technology and superior performance in moisture control. Designed for a variety of settings, these models cater to different room sizes and humidity levels, ensuring a comfortable and healthy living environment.

The DEIND603 is designed for smaller spaces, making it ideal for bathrooms, bedrooms, or laundry rooms. With a capacity to efficiently remove up to 16 liters of moisture per day, this model employs a compact yet powerful compressor system. The built-in hygrometer constantly monitors humidity levels, allowing for automated adjustments to maintain the desired humidity range. Its user-friendly digital controls enable easy operation, and features such as a continuous drainage option eliminate the need for frequent emptying.

The DEIND604 offers enhanced performance with a slightly larger capacity, making it suitable for medium-sized rooms. With a dehumidification rate of up to 20 liters per day, this model is equipped with a washable filter that ensures clean air output while also extending the unit's lifespan. Like the DEIND603, the DEIND604 includes an intelligent humidity control system and a choice between manual or automatic settings, providing versatility for users. Its portable design, equipped with wheels, ensures easy mobility around the home.

Moving to the DEIND804, this model is engineered for larger spaces and can handle up to 25 liters of moisture removal each day. It features advanced energy-efficient technology, which not only lowers operating costs but also reduces environmental impact. The DEIND804 boasts a large water tank that allows for extended use without emptying, alongside a continuous drainage option for hassle-free operation. Additionally, an ultra-quiet operation ensures that it functions silently, making it perfect for bedrooms or quiet environments.

All three models are equipped with safety features, such as an automatic shut-off mechanism that activates when the water tank reaches full capacity, preventing any overflow. With sleek designs and portable capabilities, the DeLonghi DEIND603, DEIND604, and DEIND804 stand out in terms of efficiency, convenience, and effectiveness, making them ideal choices for anyone seeking to improve air quality and reduce humidity in their living spaces. Each model represents DeLonghi's commitment to quality and advanced technology, ensuring user satisfaction and comfort.
Top Page Image Contents