Making Coffee

8.	Press the OK button to confirm. The		symbol appears
	under “Auto-start” on the display.
9.	Press the ESC button to exit the menu. When the appliance
	is in stand-by, the	symbol appears next to the clock
	to indicate that auto-start has been programmed.
To disable the function:

1.Press the MENU button to enter the settings menu.

2.Press the or button until “Auto-start” is displayed;

3.Press the OK button. “Disable?” is displayed;

4.Press the OK button to confirm;

5.Press the ESC button to exit the menu. When the appliance

is in stand-by, the symbol is no longer displayed.

Auto-Off (Stand-by)

The appliance is set by default to go off if not used for two hours.

The time can be changed so that the appliance switches off after 15 or 30 minutes, or after 1, 2 or 3 hours.

To re-programme Auto-off, proceed as follows:

1.Press the MENU button to enter the settings menu.

2.Press the or button until “Auto-off” is displayed;

3.Press the OK button;

4.Press the or button until the required time (15 or 30 minutes, or 1, 2 or 3 hours) is displayed;

5.Press the OK button to confirm;

6.Press the ESC button exit the menu.

Auto-off is programmed.

Setting the temperature

To modify the temperature of the water used to make the coffee, proceed as follows:

1.Press the MENU button to enter the settings menu.

2.Press the or button until Set temperature” is displayed;

3.Press the OK button;

4.Press the or button until the required temperature is displayed (• = low; •••• = high);

5.Press the OK button to confirm;

6.Press the ESC button exit the menu.

Setting water hardness

For instructions on setting water hardness, see page 16.

Statistics function

This displays statistics relating to the machine. To display, proceed as follows:

1.Press the MENU button to enter the settings menu.

2.Press the or button until “Statistics” is displayed;

3.Press the OK button;

4.Press the or button, you can check:

-how many coffees have been made;

-how many times the machine has been descaled.

-the total number of litres of water delivered.

5. Press the ESC button twice to exit the menu.

Default values (reset)

This resets all menu settings and programmed quantities back to the default values (with the ex-ception of the language which remains as set).

1.Press the MENU button to enter the menu;

2.Press the or button until “Default values” is displayed;

3.Press the OK button;

4.The message “Confirm?” is now displayed.

5.Press the OK button to confirm and exit.

Please note!

A few seconds may elapse between “Energy saving” mode and delivery of the first coffee.

Selecting the coffee taste

The appliance is set by default to make coffee with a standard taste.

You can also choose one of these tastes: Extra-mild taste

Mild taste Standard taste Strong taste Extra-strong taste

To change the taste, press thebutton (fig. 7) repeatedly until the required taste is displayed.

Selecting the quantity of coffee in the cup

The appliance is set by default to make a standard quantity of coffee.

To select the quantity of coffee, press the button (fig.

8)repeatedly until the message corresponding to the required quantity of coffee is displayed:

Corresponding	espresso	LONG COFFEE
coffee	(ml)	(ml)

MY COFFEE	program.	program. from
	from 20 to 180	20 to 250

SHORT	≃40	≃ 125
STANDARD	≃60	≃ 175
LONG	≃90	≃ 210
EXTRA LONG	≃120	≃ 250