Melissa 644-012, 144-002, 644-013, 644-017 Using the Apparatus, Assembly before use, Use, Storage

Page 15

USING THE APPARATUS

Assembly before use:

Place the motor section (3) on a flat surface, e.g. a kitchen counter, and make sure it is standing firmly on the four suckers underneath.

Place the base(6) on the motor section so that the spout (5) fits in the slot on the side of the motor section.

Push the fruit pulp holder (2) up under the drain edge on the base so that it locks on the foot of the motor unit tightly.

Carefully lock the centrifuge bowl (7) onto the base. o Be careful not to touch the sharp parts in the

bottom of the centrifuge bowl.

o Make sure that the centrifuge bowl sits properly on its base, so that the gear on the bottom of the bowl engages the gear in the base.

o Make sure that the centrifuge bowl doesn't sit too loosely on the base and that it rotates evenly.

Place the lid (10) on the appliance so that it covers both the fruit pulp holder and the centrifuge bowl unit. Make sure that the lid fits tightly onto the base.

Turn the lock mechanism (4) to the vertical position and make sure that it engages the lid and locks it fast. The lock mechanism makes a clicking sound when this is done correctly.

Place a glass, bowl or other suitable container under the spout.

The spout must be in the down position to let the juice run out

The apparatus now ready for use.

Preparing fruits and vegetables for juicing

Always wash fruits and vegetables thorougly before juicing.

It is not necessary to remove seeds, pits or thin peels before using the appliance.

Fruits with thick peels such as oranges and lemons must be peeled before juicing. It is particularly important to remove all the peel (including the pith), as even small amounts of peel can impart an unpleasant taste to the juice.

It is also necessary to remove large pits (such as plum and apricot pits) to avoid damaging the appliance.

Large fruits and vegetables should be cut into pieces that can fit into the funnel (9).

Use

Start the appliance by turning the =n/Off button to position "1" (low speed) or position "2" (high speed). o The low speed setting is suitable for juicing soft

fruits and vegetables.

o The high speed setting is suitable for juicing harder fruits and vegetables.

Feed the selected fruits and/or vegetables into the appliance through the funnel a little at a time, pushing them down using the tamper (1).

o Make sure that you turn the tamper so that the groove in the tamper fits into the funnel properly.

o Long vegetables such as carrots should be fed into the funnel pointy end first.

o Press the fruits and/or vegetables gently with the funnel. Too much presser reduces the amount of juice extracted and can damage the appliance.

oStop the appliance before removing the tamper to add more fruit/vegetables in order to avoid to avoid splashes.

Keep an eye on the fruit pulp holder and stop juicing before the holder becomes too full.

Place the spout in the up position to stop the juice flow. For example when you wish to empty or change bowl.

Always turn off the power by turning the "On/Off" button to "0" position before taking off the lid.

Please note: Do not leave the appliance running for more than 1 minutes at a time. If the appliance has been running for 1 minutes, allow it to cool down before you use it again.

TIP

If you line the fruit pulp holder with a plastibag before using the appliance, it will be easier to clean the appliance.

Use fresh fruits and vegetables – they contain the most juice.

Good candidates for juicing include pineapple, apples, cucumbers, celery, carrots, spinach, melons, tomatoes and most citrus fruits.

The various varieties of apple yield juice with different flavors and consistency. Experiment with different combinations to find your own favorite.

Leafy green vegetables such as cabbage and spinach can be juiced. Roll the leaves into cylinders of an appropriate size before feeding them into the funnel.

Fibrous fruits and vegetables as well as those with very firm flesh such as bananas, mangoes, papayas and avocadoes are not well-suited to juicing, as the result is often mashed fruit instead of juice.

All types of juice should be consumed right after juicing, as fresh juice quickly looses important nutrients when exposed to the oxygen in the air.

Taste can also be affected.

Pure apple juice turns brown quickly when exposed to air. To prevent discoloration, serve apple juice immediately after juicing or add a little lemon juice.

Remember that fruit pulp can be used in cakes, vegetable lasagne, muffins, etc.

Storage

Ensure the appliance is clean and dry before storing.

The appliance contains sharp parts - keep out of the reach of children.

15

Image 15
Contents 644-009/ 644-012/ 644-013/ 144-002 FØR Første Anvendelse IntroduktionSikkerhedsforanstaltninger Oversigt Over Apparatets DeleTIP Brug AF ApparatetImportør RengøringOplysninger OM Bortskaffelse OG Genbrug AF Dette Produkt GarantibestemmelserSäkerhetsåtgärder Beskrivning AV Apparatens DelarInnan Första Användning Tips AnvändningGarantin gäller inte om RengöringInformation OM Kassering OCH Återvinning AV Denna Produkt GarantivillkorFØR Apparatet TAS I Bruk Første Gang InnledningSikkerhetsregler Oversikt Over Apparatets DelerRengjøre Apparatet Bruk AV ApparatetInformasjon OM Avhending OG Resirkulering AV Produktet GarantibetingelserGarantien gjelder ikke Ennen Ensimmäistä Käyttökertaa JohdantoTurvallisuustoimenpiteet Laitteen PääosatVihje Laitteen KäyttöPuhdistus Tietoja Tuotteen Hävittämisestä JA KierrättämisestäTakuuehdot Prior to First USE Safety MeasuresIntroduction KEY to Main Components of the ApplianceUse Using the ApparatusAssembly before use Preparing fruits and vegetables for juicingFor United Kingdom only CleaningGuarantee Terms Information on Disposal and Recycling of this ProductEinleitung SicherheitshinweiseHauptbestandteile DES Geräts VOR DEM Erstmaligen Gebrauch Gebrauch DES GerätsTipp Diese Garantie gilt nicht, wenn LagerungReinigung GarantiebedingungenWstęp Przed Pierwszym Użyciem Importer Ohutusmeetmed SissejuhatusSeadme Kasutamine Utiliseerimine Müüja Vastutuse Tingimused Mudel …………………………………

644-009, 644-017, 644-013, 144-002, 644-012 specifications

Melissa is an innovative software solution designed to enhance data management and verification processes for businesses. With its comprehensive suite of features, Melissa provides tools that ensure accurate and reliable information while improving business efficiency.

One of the standout features of Melissa is its powerful data cleansing capabilities. The software can process lists of customer data to identify and rectify inaccuracies such as duplicate records, invalid addresses, and incorrect contact information. This feature is essential for businesses that rely on marketing campaigns, as it ensures targeted outreach to verified leads, ultimately increasing conversion rates.

Another significant component of Melissa is its address verification technology. The system employs algorithms that utilize real-time data from multiple sources to verify the accuracy of addresses. Users can integrate Melissa's address verification tools into their systems to automatically validate addresses entered into forms or databases, significantly reducing shipping errors and improving customer satisfaction.

Melissa also offers enhanced geocoding services, which convert addresses into geographic coordinates. This is particularly useful for businesses seeking to optimize logistics and improve route planning. By accurately mapping customer addresses, companies can ensure efficient delivery, saving time and resources.

Data enrichment is another key characteristic of Melissa. The platform allows businesses to append valuable demographic and firmographic data to existing customer profiles. This added layer of information enables better segmentation, personalized marketing strategies, and improved customer insights, ultimately leading to a more informed decision-making process.

In terms of technology, Melissa leverages cloud computing, which means users can access its features from anywhere with an internet connection. The system is designed for seamless integration with existing CRM and ERP systems, allowing businesses to enhance their data management efforts without overhauling their entire infrastructure.

Melissa prioritizes security and compliance, ensuring that all data is handled in accordance with industry regulations such as GDPR and CCPA. This focus on security gives businesses peace of mind as they handle sensitive customer information.

Overall, Melissa's suite of tools—including data cleansing, address verification, geocoding, and data enrichment—equips businesses with the capabilities needed to manage their data effectively. By investing in Melissa, organizations can enjoy a streamlined data management process that leads to enhanced operational efficiency and improved customer engagement.