Listening to Radio Programs

ENGLISH

Using the Various Functions

1.Using the auto preset memory function

This function automatically stores the FM stations which can be received in the area in which the set is being used in the preset memory. Use this function so that the RDS functions can be used more effectively. Also note that the channel memories can be changed at will even after the preset stations have been stored with this function.

Operation

1.Connect the FM antenna and set it so that FM stations can be received.

2.Press the POWER button to turn on the power while holding in the MEMORY and SHIFT/PTY button.

3.Searching begins automatically and stations are stored in the preset memory in order, beginning from channel A1. (The operation automatically stops once 30 stations have been set in the memory).

2.Storing new stations at the preset channels

The reception frequency, RDS service information. Tuning mode and input characters can be stored at the different channel memories.

When this operation is performed, the station already stored in that channel memory using the auto preset memory function is cleared.

Operation

1.Press the MEMORY button. (The “MEMO” indicator flash.)

2.Use the SHIFT/PTY button to select the block, A to F.

3.Use PRESET buttons (1 to 5) to select the channel at which the station is to be stored.

4.Press the MEMORY button while the “MEMO” indicator is flashing.

3.Recalling preset channels

Use the following operation to recall preset channels:

Operation

1.Use the SHIFT/PTY button to select the block, A to F.

2.Use PRESET buttons (1 to 5) to select the channel at which to store the station.

4.Inputting characters

Some characters can be input (up to 8 characters).

The input characters can be stored at the preset channels.

Operation

1.Press the SEARCH/CHA button four times. (The cursor flashes at the first place.)

•

Flashes

2.Use the TUNING buttons to select the character for the first place.

(The selected character flashes.)

•

Flashes

3.Press the SHIFT/PTY button to move the cursor the next place.

(The cursor flashes at the second place.)

•

Flashes

4. Repeat steps 2 and 3 above to input up to 8 characters.

•

Flashes

5.Press the MEMORY button twice within 5 seconds of entry completion. The input characters can be stored in the memory.

To keep the input characters, be sure to store them in a channel memory.

6.Clearing characters

1.Recall the character you want to clear.

2.Press the SEARCH/CHA button 4 times until the character at the first place flashes.

3.Then press the SHIFT/PTY button for at least 4 seconds. The current character will then be cleared.

Using the RDS Functions (for FM only)

1.RDS Search

Use this to automatically search and stop at station offering RDS services.

Operation

1. Press the SEARCH/CHA button once.

Flashes

2.Press the TUNING button to start a search of the preset frequencies.

Flashes

●�

Flashes