Mounting The Volume Control
Adjusting Output Level
The enclosed mounting strip is
| CAMBRIDGEW |
| ORKS |
| SOUND |
1 Remove protective paper from one | 2 Press exposed adhesive side |
side to reveal adhesive. | firmly against back of volume |
| control. |
AMBRIDGE | W |
C S |
|
3 Remove remaining paper strip. | 4 Press control firmly against |
| mounting surface |
| (desktop, keyboard or monitor). |
In most instances, the PCWorks FourPointSurround Volume Control will be the most convenient way to adjust the overall playback level. It responds instantly and doesn’t require you to pause games or programs. But there are other output level controls present in software to consider.
Versions of Microsoft® Windows® and most other operating systems offer an
Set any software volume controls to approximately 75% of their maximum output level. This should allow the PCWorks Four- PointSurround Volume Control
to achieve the highest output level desired when set to its loudest setting.
If the PCWorks FourPoint- Surround’s maximum output is still not sufficient at the extreme setting of its Volume Control, try increasing one and only one of the software volume controls to increase overall output.
If you find the optimum output level of the PCWorks FourPoint- Surround system occurs at too low a setting of its volume control, reduce the setting of one software volume control (preferably the operating system’s output level control) to achieve greater control range.
Note: Some software volume controls may introduce distortion when set to their maximum level. Experiment to achieve the cleanest sound.
9