Cambridge SoundWorks PCWorks Overview Installation Sequence, Volume Control with 12 ft. audio

Page 6

Inspecting For Damage

Overview

Installation Sequence

Examine each speaker unit carefully for signs of shipping damage. If there is any damage do not install the system.

If there is any problem, call the appropriate number listed in the warranty information.

All the items shown in the illustration should be included. If anything is missing, notify the retailer.

Save the carton and its inserts in case you need to transport your PCWorks FourPointSurround system later.

PCWorks FourPointSurround consists of a powered subwoofer, four satellite speakers and a volume control. All five speakers are magnetically shielded.

The subwoofer is designed to sit on the floor beneath a desk, and sounds best in this position. The satellites used for the front left and right channels should flank the computer monitor. The satellites used for the rear left and right channels can be placed on the desktop, on floor stands, or attached to other sites with hook and loop fasteners.

1.Read through the instructions before installing the speakers. The instructions assume you have a 4-channel sound card, one that supports DirectSound3D and has front and rear stereo outputs. If your sound card has a single stereo minijack line output, please read the note under “Volume Control” on page 8.

2.Place the satellites and the subwoofer at appropriate sites near your computer. Attach the stands, if necessary.

3.To help you identify each satellite’s channel later, apply the appropriate preprinted label to the rear of each satellite. Be sure both the satellites chosen for the front and rear have the same cable length.

4.Connect the four satellites to the back of the subwoofer enclosure. Leave all the wires accessible.

F

(2) Apex Joints

R

F

 

Volume Control with 12 ft. audio

R

connecting cable and stereo mini-plugs*

 

 

 

(4) Hook& Loop

 

 

 

fasteners for the

DC Power

 

 

satellite cubes

 

Desktop Stands for satellites (4)

Adapter

Subwoofer/amplifier

(one each)

 

FRONT LEFT

FRONT LEFT

LEFT

 

 

FRONT

REAR LEFT

REAR LEFT

LEFT

 

 

REAR

FRONT RIGHT

FRONT RIGHT

RIGHT

 

 

FRONT

REAR RIGHT

REAR RIGHT

RIGHT

 

 

REAR

Strips of 5 feet (4)

Labels

 

Semipermanent mounting strip

(1)for attaching volume control

Satellites: (2) with 9 ft. speaker wire attached, (2) with 12 ft. speaker wire attached

(6) Rubber foot plugs

(4) Solid Legs (2) Slotted Legs

2

Image 6
Contents PCWorks FourPointSurround Avis Important Safety Instructions Contents Introduction Cambridge SoundWorksOverview Installation Sequence Volume Control with 12 ft. audioSpeaker Placement Speaker Wiring Diagram CambridgeSatellite Connections Attaching The Desktop Stands Attaching The Floor Stands Power Supply Adapter Volume Control LineMounting The Volume Control Adjusting Output Level ControlSubwoofer Level Control Playback LevelsOptimizing The Sound Mounting The Satellites Your System To a flat surfaceTo the wall Specifications Technical SupportInside U.S.A., Canada and Latin America Inside Europe FranceYear Limited Warranty Inside AsiaPage Needham Street, Newton, MA