Getting Started

A) Remove the SoundWorks i755 from its protective polybag and place it in your preferred location. Note: The i755’s bass output will be reduced if it is placed on a plush surface, like a thick carpet or rug. The Tone Alarm volume will also be reduced.

B) To prepare and connect the AM band antenna:

1)Locate the antenna

2)Fold the base

3)Snap the base into place

4)Position the AM antenna in an out-of-the-way site. Avoid placing it near the i755 Power Supply.

Insert the AM Antenna’s miniplug into the REAR CONNECTOR PANEL minijack marked AM ANT.

Rotate the AM antenna to achieve the best signal for individual AM stations.

C) Straighten the wire antenna on the

REAR CONNECTOR PANEL marked “FM ANT”.

D) Connect the Power Supply by inserting the its AC plug into a convenient outlet. Then insert the Power Supply’s smaller DC plug into the jack in the rear of the i755 marked DC power.

REAR CONNECTOR PANEL

STRAIGHTEN FM WIRE ANTENNA

i755 POWER INPUT

	1
For best AM radio reception, position
the Power Supply case at least three	7
feet away from the AM Antenna	7

CSW_SWI755_UM_R1.2.indd 7

10/21/2009 2:39:35 AM