Weber 43176 manual Tank Cabinet Troubleshooting, Liquid Propane Cylinder Requirements

Page 12

12

GAS INSTRUCTIONS

 

 

•Do not use a damaged LP cylinder. Dented or rusty LP cylinders or LP cylinders with a damaged valve may be hazardous and should be replaced with a new one immediately.

Liquid Propane (LP) Cylinder(s)

•The joint where the hose connects to the LP cylinder must be leak tested each time the LP cylinder is reconnected. For example, test each time the LP cylinder is refilled.

•Be sure the regulator is mounted with the small vent hole pointed downward so that it will not collect water. This vent should be free of dirt, grease, bugs etc.

•The gas connections supplied with your Weber® gas barbecue have been designed and tested to meet 100% CSA and ANSI requirements.

1

DOT 4BA240

00/07

WARNING: Replacement LP tanks must match the regulator connection supplied with this barbecue.

LIQUID PROPANE CYLINDER REQUIREMENTS

•Check to be sure cylinders have a D.O.T. certification (1), and date tested (2) is within five years. Your LP gas supplier can do this for you.

•All LP tank supply systems must include a collar to protect the cylinder valve.

•The LP cylinder must be a 20-lb. size approximately (18¼ inches high, 12¼ inches in diameter).

•The cylinder must be constructed and marked in accordance with the Specifications for LP - Gas Cylinders of the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes or Transportation of Dangerous Goods; and Commission, as applicable.

IN CANADA

LIQUID PROPANE CYLINDER REQUIREMENTS

Note: Your retailer can help you match a replacement tank to your barbecue.

•The LP cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders, T.C.

2

TANK CABINET TROUBLESHOOTING

PROBLEM

CHECK

CURE

 

 

 

Burners do not light.

Is gas supply off?

Turn supply on.

 

 

 

Flame is low in HIGH position.

Is fuel hose bent or kinked?

Straighten fuel hose.

 

 

 

Burners do not light -or- burners have a small flickering

The excess flow safety device, which is part of

To reset the excess flow safety device turn all burner control

flame in the HIGH position -or- barbecue temperature

the barbecue to cylinder connection, may have

knobs and the cylinder valve OFF. Disconnect the regulator

only reaches 250˚ to 300˚F in the HIGH position.

activated.

from the cylinder. Turn burner control knobs to HIGH. Wait at

 

 

least 1 minute. Turn burner control knobs OFF. Reconnect

 

 

the regulator to the cylinder. Turn cylinder valve on slowly.

 

 

Refer to “Lighting Instructions”.

 

 

 

If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.

WEBER-STEPHEN PRODUCTS CO.

www.weber.com®

©2005- The following trademarks are registered in the name of Weber-Stephen Products Co., an Illinois corporation, located at 200 East Daniels Road, Palatine, Illinois 60067 U.S.A. Australia; Smokey Joe, Weber, Kettle Silhouette, Genesis, Austria; Kettle Silhouette, Smokey Joe, Weber, Benelux; Kettle Silhouette, Smokey Joe, Weber, Compact Grill Configura- tion, Botswana; Weber, Canada; Smokey Joe, Genesis, China; Kettle Silhouette, Denmark; Kettle Silhouette, Smokey Joe, Weber, Finland; Smokey Joe, France; Kettle Silhouette, Smokey Joe, Weber, One-Touch, Germany; Smokey Joe, Weber, One-Touch, Greece; Smokey Joe, Ireland; Kettle Silhouette, Smokey Joe, Italy; Smokey Joe, Weber, Japan; Smokey Joe, Weber, Korea; Smokey Joe, Weber, New Zealand; Weber, Smokey Joe, Nigeria; Weber, Norway; Smokey Joe, Weber, Portugal; Weber, South Africa: Smokey Joe, Weber, Kettle Configuration, Spain; Smokey Joe, Weber, Sweden; Kettle Silhouette, Smokey Joe, Switzerland; Kettle Silhouette , Smokey Joe, Weber, United Kingdom; Smokey Joe, Weber, Weber One-Touch, U.S.A..; Kettle Configuration, Kettle Silhouette, Smokey Joe, Weber, One-Touch, Firespice, Go-Anywhere, U.S.A.;Kettle Configuration, Kettle Silhouette, Genesis, Fla- vorizer, Crossover, Flamgo, Performer, Rapidfire, Tuck ‘N Carry, Jumbo Joe, Bar-B-Kettle, Master-Touch, Spirit, Grill Out, Summit, Platinum, 1-800-Grill-Out, Ranch, Matchless Flame,

Zimbabwe; Weber, Kettle Configuration, Kettle Silhouette .

Printed in USA.

WWW.WEBER.COM®

Page 11 Page 13
Image 12
Page 11 Page 13
Contents #43176 Wash hands after handling this product Liquid Propane GAS Units onlyWarranty For Installation in CanadaCustomer Service Center Roselle Road, Suite Schaumburg, IL Storage AND/OR NonuseAll dimensions are to finished surfaces GAS InstructionsLocating Your LP Tank Cabinet Assembly LP Tank Cabinet GAS Line DimensionsBUILT-IN GAS Line Locations General Construction DetailsMounting the LP Tank Cabinet Side Burner GAS Supply Connections Connect GAS SupplyConnecting the Liquid Propane Cylinder Important LP Cylinder InformationLeak Check Preparation Check That ALL Burner Valves are OFFTo Connect the Hose to the Cylinder Check for GAS LeaksCheck Refilling the Liquid Propane Cylinder Checking the Fuel Level in Your TankSafe Handling Tips for Liquid Propane GAS Cylinders Tank Cabinet Troubleshooting Liquid Propane Cylinder RequirementsCanada Liquid Propane Cylinder Requirements Para SU Seguridad Peligros Y Advertencias PeligroAdvertencias Únicamente Unidades DE GAS Propano LicuadoGarantía OperaciónAlmacenaje Y/O no USO Para LA Instalación EN CanadáDimensiones DEL Corte DE LA Estructura Empotrada Instrucciones Sobre EL GASUbicación DEL Gabinete DEL Tanque DE Propano Licuado Separación DE Superficies O Estructura CombustiblesEnsamblaje Ubicaciones DE LAS Líneas DE GAS EmpotradasDetalles Generales DE Construcción Montaje DEL Soporte DEL Tanque DE Propano Licuado Dimensiones DE Corte DEL Empotramiento Conectar EL Suministro DE GASInstrucciones Para EL GAS Información Importante Sobre EL Cilindro DE Propano LicuadoPreparativos Para LA Búsqueda DE Fugas Conexión DEL Cilindro DE Propano LicuadoCompruebe QUE no Haya Fugas DE GAS Para conectar la manguera al cilindroComprobación VerificarCómo Recargar EL Cilindro DE Propano Licuado Cómo Verificar EL Nivel DE Combustible EN SU TanqueCilindros DE Propano Licuado Requisitos DE LOS Cilindros DE Propano LicuadoEN Canadá Avertissement Mises EN Garde Appareils a GAZ Propane UniquementEN CAS D’INSTALLATION AU Canada GarantieUtilisation Stockage ET/OU InutilisationDimensions Pour LE Decoupage DE LA Structure Encastree Toutes les dimensions correspondent à des surfaces finiesInstructions Relatives AU GAZ Localisation DE Votre Meuble DE Bouteille DE PLEmplacements DE LA Conduite DE GAZ Encastree Emplacements DES Conduites DE GAZ EncastreesMontage Informations Generales Relatives a LA ConstructionMontage DU Meuble DE LA Bouteille DE PL Dimensions Pour LE Decoupage DE L’ENCASTREMENT Raccordement DE L’ARRIVÉE DE GAZInformations Importantes Relatives a LA Bouteille DE PL Preparation DE LA Detection DES FuitesConnexion DE LA Bouteille DE Propane Liquide Verifiez QUE Toutes LES Valves DES Bruleurs Sont FermeesDetection DES Fuites DE GAZ Pour connecter le tuyau à la bouteilleVérifiez Rechargement DE LA Bouteille DE Propane Liquide Verification DU Niveau DE Combustible Dans Votre BouteilleDepannage DU Meuble DE LA Bouteille Bouteilles DE GAZ Propane Liquide PLExigences Relatives À LA Bouteille DE Propane Liquide AU Canada

43176 specifications

The Weber 43176 is a quintessential tool for grill enthusiasts, offering a perfect blend of performance, durability, and innovative features. Designed with an emphasis on functionality, this model elevates the grilling experience, making it an essential addition to any outdoor culinary setup.

One of the standout features of the Weber 43176 is its robust construction. Made with high-quality materials, it ensures longevity even when exposed to the elements. The grill boasts a heavy-duty build that can withstand the rigors of outdoor cooking, allowing it to retain its performance over time.

The cooking surface of the Weber 43176 is another key highlight. With a spacious grilling area, this grill provides ample space to prepare meals for family and friends. Whether it's burgers, steaks, or vegetables, the large cooking surface allows for versatile meal preparation. The even heat distribution from the grill ensures thorough cooking, eliminating any hotspots that can lead to unevenly cooked food.

In terms of technology, the Weber 43176 incorporates a powerful ignition system that simplifies the start-up process. This innovative feature allows for quick and hassle-free ignition, ensuring you're ready to grill in no time. Additionally, the grill is designed for efficient fuel consumption, providing optimal performance while minimizing gas use.

Another noteworthy characteristic of the Weber 43176 is its user-friendly design. The grill features adjustable heat settings, enabling users to control the grilling temperature easily. This level of precision is particularly beneficial for those who enjoy experimenting with different cooking styles and techniques.

Cleaning and maintenance are also made simple with the Weber 43176. The grill is designed for easy access to its components, ensuring that post-cooking cleanup is as effortless as possible. The removable grease tray captures drippings, making it easy to maintain a mess-free grilling environment.

In summary, the Weber 43176 is a remarkable grill that combines sturdy construction, efficient technology, and user-friendly features. It provides an exceptional grilling experience while ensuring ease of use and maintenance. Whether you are a seasoned grilling expert or a novice, the Weber 43176 shines as a reliable and versatile addition to your outdoor cooking arsenal.
Top Page Image Contents