Weber 43176 manual Check

Page 10

10

GAS INSTRUCTIONS

 

 

Note - All factory-made connections have been thoroughly checked for gas leaks.The burners have been flame-tested.As a safety precaution however, you should recheck all fittings for leaks before using your Weber® Gas Barbecue. Shipping and handling may loosen or damage a gas fitting.

WARNING: Perform these leak checks even if your barbecue was dealer or store assembled.

You will need: a soap and water solution, and a rag or brush to apply it.

Note - Since some leak test solutions, including soap and water, may be slightly corrosive, all connections should be rinsed with water after checking for leaks. Make sure side burner is OFF.

To perform leak checks: open cylinder valve by turning the cylinder valve hand-wheel counterclockwise.

WARNING: Do not ignite burners when leak checking.

Check for leaks by wetting the connections with the soap and water solution and watching for bubbles. If bubbles form or if a bubble grows, there is a leak.

Check:

1)Gas Line-to-”T” Connection

2)Regulator-to-Cylinder connection.

WARNING: If there is a leak at connection (1), retighten the fitting with a wrench and recheck for leaks with soap and water solution.

If a leak persists after re-tightening the fitting, turn OFF the gas. DO NOT OPERATE THE GRILL. Contact Customer Service 1-800-446-1071.

Check:

3)“T” Connection-to-Hose connections.

4)The hose-to-Regulator connection.

WARNING: If there is a leak at connections (2,3, or 4), turn OFF the gas. DO NOT OPERATE THE GRILL. Contact Customer Service 1-800-446-1071.

When leak checks are complete, turn gas supply OFF at the source and rinse connections with water.

(1)

 

 

Side View

 

(2)

 

Side View

(4)

(3)

ATTENTION: This product has been safety tested and is only certified for use in a specific country. Refer to country designation located on outer carton.

These parts may be gas carrying or gas burning components. Please contact Weber-Stephen Products Co., Customer Service Department for genuine Weber-Stephen Products Co. replacement part(s) information.

WARNING: Do not attempt to make any repair to gas carrying or gas burning components without contacting Weber-Stephen Products Co., Customer Service Department. Your actions, if you fail to follow this product Warning, may cause a fire or an explosion resulting in serious personal injury or death and damage to property.

WWW.WEBER.COM®

Page 9 Page 11
Image 10
Page 9 Page 11
Contents #43176 Wash hands after handling this product Liquid Propane GAS Units onlyCustomer Service Center Roselle Road, Suite Schaumburg, IL WarrantyFor Installation in Canada Storage AND/OR NonuseGAS Instructions All dimensions are to finished surfacesLocating Your LP Tank Cabinet BUILT-IN GAS Line Locations AssemblyLP Tank Cabinet GAS Line Dimensions General Construction DetailsMounting the LP Tank Cabinet Side Burner GAS Supply Connections Connect GAS SupplyLeak Check Preparation Connecting the Liquid Propane CylinderImportant LP Cylinder Information Check That ALL Burner Valves are OFFTo Connect the Hose to the Cylinder Check for GAS LeaksCheck Checking the Fuel Level in Your Tank Refilling the Liquid Propane CylinderSafe Handling Tips for Liquid Propane GAS Cylinders Liquid Propane Cylinder Requirements Tank Cabinet TroubleshootingCanada Liquid Propane Cylinder Requirements Para SU Seguridad Advertencias Peligros Y AdvertenciasPeligro Únicamente Unidades DE GAS Propano LicuadoAlmacenaje Y/O no USO GarantíaOperación Para LA Instalación EN CanadáUbicación DEL Gabinete DEL Tanque DE Propano Licuado Dimensiones DEL Corte DE LA Estructura EmpotradaInstrucciones Sobre EL GAS Separación DE Superficies O Estructura CombustiblesUbicaciones DE LAS Líneas DE GAS Empotradas EnsamblajeDetalles Generales DE Construcción Montaje DEL Soporte DEL Tanque DE Propano Licuado Dimensiones DE Corte DEL Empotramiento Conectar EL Suministro DE GASPreparativos Para LA Búsqueda DE Fugas Instrucciones Para EL GASInformación Importante Sobre EL Cilindro DE Propano Licuado Conexión DEL Cilindro DE Propano LicuadoCompruebe QUE no Haya Fugas DE GAS Para conectar la manguera al cilindroComprobación VerificarCómo Recargar EL Cilindro DE Propano Licuado Cómo Verificar EL Nivel DE Combustible EN SU TanqueRequisitos DE LOS Cilindros DE Propano Licuado Cilindros DE Propano LicuadoEN Canadá Avertissement Mises EN Garde Appareils a GAZ Propane UniquementUtilisation EN CAS D’INSTALLATION AU CanadaGarantie Stockage ET/OU InutilisationInstructions Relatives AU GAZ Dimensions Pour LE Decoupage DE LA Structure EncastreeToutes les dimensions correspondent à des surfaces finies Localisation DE Votre Meuble DE Bouteille DE PLMontage Emplacements DE LA Conduite DE GAZ EncastreeEmplacements DES Conduites DE GAZ Encastrees Informations Generales Relatives a LA ConstructionMontage DU Meuble DE LA Bouteille DE PL Dimensions Pour LE Decoupage DE L’ENCASTREMENT Raccordement DE L’ARRIVÉE DE GAZConnexion DE LA Bouteille DE Propane Liquide Informations Importantes Relatives a LA Bouteille DE PLPreparation DE LA Detection DES Fuites Verifiez QUE Toutes LES Valves DES Bruleurs Sont FermeesDetection DES Fuites DE GAZ Pour connecter le tuyau à la bouteilleVérifiez Rechargement DE LA Bouteille DE Propane Liquide Verification DU Niveau DE Combustible Dans Votre BouteilleExigences Relatives À LA Bouteille DE Propane Liquide Depannage DU Meuble DE LA BouteilleBouteilles DE GAZ Propane Liquide PL AU Canada

43176 specifications

The Weber 43176 is a quintessential tool for grill enthusiasts, offering a perfect blend of performance, durability, and innovative features. Designed with an emphasis on functionality, this model elevates the grilling experience, making it an essential addition to any outdoor culinary setup.

One of the standout features of the Weber 43176 is its robust construction. Made with high-quality materials, it ensures longevity even when exposed to the elements. The grill boasts a heavy-duty build that can withstand the rigors of outdoor cooking, allowing it to retain its performance over time.

The cooking surface of the Weber 43176 is another key highlight. With a spacious grilling area, this grill provides ample space to prepare meals for family and friends. Whether it's burgers, steaks, or vegetables, the large cooking surface allows for versatile meal preparation. The even heat distribution from the grill ensures thorough cooking, eliminating any hotspots that can lead to unevenly cooked food.

In terms of technology, the Weber 43176 incorporates a powerful ignition system that simplifies the start-up process. This innovative feature allows for quick and hassle-free ignition, ensuring you're ready to grill in no time. Additionally, the grill is designed for efficient fuel consumption, providing optimal performance while minimizing gas use.

Another noteworthy characteristic of the Weber 43176 is its user-friendly design. The grill features adjustable heat settings, enabling users to control the grilling temperature easily. This level of precision is particularly beneficial for those who enjoy experimenting with different cooking styles and techniques.

Cleaning and maintenance are also made simple with the Weber 43176. The grill is designed for easy access to its components, ensuring that post-cooking cleanup is as effortless as possible. The removable grease tray captures drippings, making it easy to maintain a mess-free grilling environment.

In summary, the Weber 43176 is a remarkable grill that combines sturdy construction, efficient technology, and user-friendly features. It provides an exceptional grilling experience while ensuring ease of use and maintenance. Whether you are a seasoned grilling expert or a novice, the Weber 43176 shines as a reliable and versatile addition to your outdoor cooking arsenal.
Top Page Image Contents