Black & Decker B2300 manual Control Panel Start/Stop Button, LCD Digital Display, Loaf Size Button

B2300Pub1000002859 3/6/06 3:22 PM Page 6

Control Panel

B

1. Start/Stop Button

Press to begin the cycle and to display the total time for the selected bread to be completed. To cancel the cycle, press and hold for about 3 seconds until you hear a beep. The unit beeps to indicate that it has stopped.

Important: Do not press Stop when checking the progress of the bread; it will cancel the program. Once a cycle

is canceled, you will have to start over again.

2. LCD Digital Display

Shows the following:

•Number for each program setting selection (1-10) with preprogrammed baking time

• Crust color (Light, Medium or Dark)

•Loaf size (2.0 LB, 2.5 LB or 3.0 LB)

•Minute-by-minute countdown of remaining time for selected program

3. Loaf Size Button

Press to select the loaf size (2.0 LB, 2.5 LB or 3.0 LB).

4. Crust Color Button

Lets you choose your preferred crust color: Light, Medium or Dark.

5. Timer Buttons

Press these buttons to set the time for delay bake (up to 13-hour delay). For example, you can time your bread to be ready for dinner or when you wake up in the morning. Set it by selecting how much time you want to pass before the bread is completed. For example, if it is 8:00 p.m. and you want the bread to be ready at 7:00 a.m., set it for 11 hours.

You can also use these buttons to adjust the time of the cycle. They adjust up or down in 10-minute increments. Changes must be made before the unit begins operation.

6. Menu Button

Press this button to select the baking cycle you want. A beep sounds each time you press the button.

5 6