Black & Decker TCM850 manual Care and Cleaning

Page 4

TCM850Pub1000001038 5/10/04 2:55 PM Page 6

 

THERMAL CARAFE

 

1.

Coffee is brewed directly into carafe via closed brew thru lid.

 

 

Lock lid by aligning LOCK arrowhead with arrowhead on carafe

 

 

rim. Coffee may overflow if the lid is not properly

 

 

in place.

F

2.

Carafe keeps coffee hot and may be left away from coffeemaker

 

for serving. Be sure the pour button is in the up position to seal

 

 

 

 

in heat and flavor.

3.Use filter basket handle to lift filter basket out.

4.Discard the paper filter with the grounds.

5.The filter basket and lid are top-rack dishwasher safe, or they may be hand washed in warm, sudsy water.

6.Wipe the interior of the brew chamber and the exterior of the carafe and coffeemaker with a soft damp cloth. Do not use abrasive cleaners or scouring pads. Never immerse the coffeemaker in water.

7.Place cleaned filter basket into cleaned brew chamber and swing closed.

3.

To pour, push down on the pour button. Be sure that lid and

 

 

carafe rim arrowheads are aligned (G).

 

Caution: Do not pour liquid from the carafe until lid is securely

 

closed.

4.

When finished pouring, push down on the pour button again

G

 

and button pops up.

5.Thermal carafe keeps coffee hot for up to four hours.

SETTING THE CLOCK (H)

1.Plug in the coffeemaker.

K

8.To clean the inside of the thermal carafe (K) and the water reservoir, wash in warm sudsy water, rinse well and allow

to air dry.

STORING

Power cord tucks into back of unit for convenient storage (L).

Maintaining Your Coffeemaker

Mineral deposits left by hard water can clog your coffeemaker.

1.Lift water reservoir fill-top or detach water reservoir and pour white vinegar into the water reservoir up to the 4-cup level mark

2.Press the HOURS and MINUTES buttons to the current time. A small light at the top left of the clock display indicates P.M.

Note: Unplugging the unit will reset the clock/timer to12:00.

PROGRAMMING THE TIMER FOR AUTO-BREW (H)

If the clock is not set for the current time of day, see "Setting the

Clock" section.

 

To preset your coffeemaker to begin brewing at a certain time, first

H

follow steps 1-11 in the "BREWING A POT OF COFFEE" section.

 

1.Press and hold the PROGRAM button for 1 second. Green light flashes and the clock display changes to show current programmed time or default of 12:00.

2.Press the HOURS and MINUTES buttons until the desired brew time is reached.

Note: If you wait more than 3 seconds to program brew time, or if the green light stops flashing, the clock redisplays the current time of day. You must then repeat the above steps to program.

3.Once programmed to the desired time, press the AUTO-ON button.

4.Programmed brewing time momentarily displays and the green AUTO-ON light illuminates indicating that the coffeemaker is preset for automatic brewing. If AUTO-ON light is not lit, automatic brewing function is not properly set.

5.When brewing begins the red "On" light illuminates.

6. Be sure carafe is properly placed into coffeemaker or coffee will not brew (J).

Note: The Auto-Brew function can be cancelled at any time by pressing the AUTO-ON button a second time. The AUTO-ON light will go out.

J

Care and Cleaning

Caution: Do not overexpose the control pad to water. It is not waterproof. Water may cause permanent damage and make coffeemaker inoperable.

CLEANING

1.Be sure the unit is unplugged and cooled.

2.Press latch to open brew chamber.

 

 

on the water window. Add cold water up to the 6-cup line (M).

 

2.

Press latch and swing out brew chamber.

 

3.

Be sure the filter basket is aligned into position.

L

4. Insert paper filter into the filter basket. Swing brew chamber

 

 

closed.

 

5.

Place the carafe with lid secured, all the way into the

 

 

coffeemaker. Position carafe with spout facing straight in, and

 

 

plug in the unit.

 

6.

Press the ON/OFF button, red brewing "On" light illuminates.

M

7.

Let half of the vinegar solution brew into the carafe (until the

 

solution level in the water window goes down to "3"). Press the

ON/OFF button again to turn off the coffeemaker and let it soak for at least 15 minutes to soften mineral deposits.

8.Press the ON/OFF button to turn the unit on again, and brew the remaining vinegar solution into the carafe.

9.When the vinegar solution has finished brewing, discard the paper filter, empty the carafe and rinse with clean water.

10.Refill the water reservoir with cold water, put a paper filter in the filter basket and run another brew cycle to rinse out any vinegar solution remaining.

11.Wash the water reservoir, filter basket, carafe and lid as instructed in "Cleaning."

5

6

Image 4
Contents Model/Modelo/Modèle TCM850 USA/Canada MexicoImportant Safeguards Polarized Plug 120V Models OnlyTAMPER-RESISTANT Screw Electrical CordHow to Use Product may vary slightly from what is illustratedBefore First USE Brewing a POT of CoffeeCare and Cleaning Instrucciones Importantes DE Seguridad Guarde Estas InstruccionesComo usar Este producto está diseñado únicamente para uso domésticoAntes DEL Primer USO Preparación del caféCuidado y limpieza Importantes Mises EN Garde Conserver CES MesuresFiche Polarisée Modèles de 120 V seulement Le produit peut différer légèrement de celui illustréUtilisation Avant LA Première UtilisationEntretien et nettoyage NettoyageRangement Entretien de la cafetière¿NECESITA AYUDA? Need HELP?DOS Años DE Garantía Limitada Esta garantía no es válida cuando Garantía solamente a México¿BESOIN D’AIDE? Republica Dominicana 975 W 120 V 60Hz 975 W 220 V 50/60Hz Importado por

TCM850 specifications

The Black & Decker TCM850 is a versatile and reliable power tool designed to meet the needs of both DIY enthusiasts and professionals. This versatile tool combines functionality with innovative technology, making it a popular choice for various projects.

One of the standout features of the TCM850 is its robust motor, which provides ample power to tackle a range of applications, from drilling to fastening. The motor offers variable speed settings, allowing users to adjust the RPM according to the specific task at hand. This flexibility is particularly useful for delicate tasks requiring precision as well as for more demanding jobs that need more power.

Another notable characteristic of the TCM850 is its compact and ergonomic design. Weighing in at a manageable weight, this tool is easy to handle and maneuver, reducing user fatigue during prolonged use. The soft grip handle enhances comfort, providing a secure hold that improves control when operating the tool.

The Black & Decker TCM850 also features a keyless chuck system, simplifying the process of changing bits. Users can easily swap out bits quickly and efficiently, minimizing downtime and increasing productivity. This system is particularly beneficial for those who frequently switch between different drill bits.

For enhanced convenience, the TCM850 is equipped with a built-in LED work light. This feature improves visibility in dimly lit areas, allowing users to work safely and effectively, even in challenging environments. The LED light is strategically positioned to illuminate the workspace without casting shadows, ensuring clear visibility of the task.

In addition to its performance features, the Black & Decker TCM850 emphasizes durability. The tool is constructed with high-quality materials designed to withstand the rigors of regular use. Its rugged design ensures that it can handle tough conditions while providing consistent performance.

Overall, the Black & Decker TCM850 is a reliable tool that combines power, convenience, and user-friendly features. Whether you're a professional contractor or a casual DIYer, its range of capabilities makes it an excellent addition to any tool collection. With its blend of power, versatility, and durability, the TCM850 stands out in the crowded market of power tools, proving to be an invaluable asset for various tasks.