Cuidado de la jarra, Depósitos minerales

2. Para limpiar el interior de la tapa del tanque, abra la tapa enteriza, permitiendo que ésta descanse en posición abierta. Limpie las superficies con un paño humedecido y cierre la tapa (A).

Cuidado de la jarra

Una jarra dañada puede resultar en posibles quemaduras a consecuencia de un líquido caliente. A fin de evitar que la jarra se rompa:

•No permita que se evapore toda el agua de la jarra mientras ésta se encuentre sobre la placa calefactora ni caliente la jarra mientras esté vacía.

•Descarte la jarra si está descascarada, rajada, o dañada de cualquier manera.

•Nunca use almohadillas de fibras abrasivas ni limpiadores; éstos rayan y debilitan el cristal de la jarra.

•No coloque la jarra sobre una hornilla de gas o eléctrica o cerca de las mismas, dentro de un horno caliente, ni dentro de uno de microondas.

•Evite el manejo brusco y los golpes.

Depósitos minerales

Los depósitos minerales que provienen del agua dura pueden obstruir su cafetera. Se recomienda que la limpieza se realice cada 3 meses. La producción excesiva de vapor o la prolongación del ciclo de colado son indicativas de que la cafetera necesita una limpieza. La frecuencia con que deben limpiarse los depósitos depende del uso del aparato y de la dureza del agua. Durante el ciclo de limpieza, el aparato produce más vapor que al colar el café y podría haber cierta salpicadura. Para eliminar los depósitos minerales:

1.Vierta vinagre blanco en el tanque hasta el nivel que indica 6 tazas. Agregue agua hasta alcanzar la marca para 12 tazas.

2.Coloque un filtro en el recipiente del filtro y cierre la tapa. Coloque la jarra sobre la placa calefactora.

3.Encienda la cafetera y permita que se cuele la mitad de la solución limpiadora dentro de la jarra (hasta que el agua alcance aproximadamente el quinto nivel). Apague la cafetera y espere 15 minutos para que se ablanden los depósitos.

4.Encienda la cafetera y permita que se cuele el resto de la solución dentro de la jarra.

5.Apague la cafetera. Vacíe la jarra y deseche el filtro sucio.

6.Llene el tanque con agua hasta el nivel 12, coloque de nuevo la jarra vacía sobre la placa calefactora y encienda la cafetera para que cuele un ciclo completo eliminando así cualquier residuo de la solución limpiadora. Quizás sea necesario repetir este proceso para eliminar por completo el olor y el sabor del vinagre.

7.Lave el cesto de colar y la jarra, según las instrucciones en la sección de limpieza de la cafetera.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

❑Read all instructions.

❑Do not touch hot surfaces. Use handle or knobs.

❑To protect against electric shock, do not place cord, plug or appliance in water or other liquids.

❑Close supervision is necessary when any appliance is used by or near children.

❑Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts and before cleaning the appliance.

❑Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair, or adjustment. Or, call the appropriate toll-free number on the cover of this manual.

❑The use of an accessory not evaluated for use with this appliance may cause injuries.

❑Do not use outdoors.

❑Do not let cord hang over the edge of table or counter, touch with hot surfaces.

❑Do not place on or near a hot gas or electric burner or in a heated oven.

❑Keep the lid on the carafe when in use.

❑The carafe is designed for use with the appliance. It must never be used on a range top.

❑Do not set a hot carafe down on a wet or cold surface.

❑Do not use the carafe if the glass is cracked or has a loose or weakened handle.

❑Do not clean the carafe with abrasive cleansers, steel wool, or other abrasive material.

❑Do not use this appliance for anything other than intended use.

❑Scalding may occur if the lid is removed during the brewing cycles.

SAVE THESE INSTRUCTIONS.

DE711 specifications

The Black & Decker DE711 is a highly regarded power tool designed specifically for professionals and DIY enthusiasts alike. Known for its versatility and robust construction, the DE711 has features that cater to a wide range of drilling and fastening applications, making it an essential addition to any workshop or toolkit.

One of the standout features of the DE711 is its variable speed control, which allows users to adjust the speed of the tool to suit different materials and tasks. This capability is particularly valuable, as it permits precision drilling in wood, metal, and plastic without the risk of damaging the workpiece. The tool typically boasts a maximum speed of around 2,500 revolutions per minute, enabling efficient drilling and driving capabilities.

The DE711 is equipped with a powerful motor that provides strong torque, ensuring that it can handle tougher tasks without straining. This is particularly advantageous for heavy-duty applications, such as when working with hardwoods or dense materials. Additionally, the tool's lightweight design minimizes fatigue during extended use, allowing for enhanced comfort and control.

Another notable characteristic of the DE711 is its 1/2-inch keyless chuck. This innovation simplifies bit changes, allowing users to quickly swap out bits without the need for additional tools. The keyless chuck design is particularly user-friendly, as it permits fast transitions between different screw sizes and drilling bits.

Durability is a key aspect of the DE711's construction. Built with high-quality materials, the power tool is designed to withstand the rigors of frequent use in various environments. Its rugged design helps protect internal components and ensures longevity, making it a reliable choice for contractors and serious hobbyists.

Additionally, the DE711 often features a built-in LED work light that illuminates dark workspaces, providing excellent visibility when working in tight or dimly lit areas. This thoughtful addition greatly enhances the usability of the tool, ensuring precision and accuracy in every task.

In terms of safety, the DE711 comes with an ergonomic grip that provides a secure and comfortable hold, reducing the likelihood of slips or accidents during operation. This attention to user comfort and safety makes the DE711 a favored choice among those who prioritize both performance and ease of use.

Overall, the Black & Decker DE711 is a powerful, versatile, and user-friendly tool that excels in a wide array of drilling and fastening tasks. With its innovative technologies and reliable performance, it stands out as a top choice for anyone looking to achieve professional-quality results in their projects.