Getting Started, Brewing, Cleaning | Black & Decker DE711 instruction

How to Use

This appliance is intended for household use only.

GETTING STARTED

1.Remove all stickers, packing material, and literature.

2.Wash all parts as instructed in the Care and Cleaning section.

3.Pour water up to 12-cup level mark in the water reservoir.

Brew it through as instructed in "BREWING," but do not add coffee grounds to the paper filter. When done, turn off the coffeemaker and discard the water from the carafe.

BREWING

1.Lift one-piece water reservoir and brew basket lid. Use water markings on carafe to fill water reservoir with water to your desired level.

2.Place a paper filter into the brew basket. Add ground coffee, (we recommend a heaping tablespoon for every cup). Close the one-piece water reservoir and brew basket lid.

3.Place carafe on the "Keep Hot" plate and plug in the unit.

4.Press ON/OFF switch.

5.Replace the carafe on the "Keep Hot" plate when not serving to keep coffee hot.

6.Press "ON/OFF" to turn off unit.

The coffeemaker will keep coffee warm for 2 hours before it automatically shuts off.

Sneak-A-Cup®Interrupt Feature

You can pour a cup of coffee while coffee is brewing without leaking from the brew basket. When finished pouring coffee, place the carafe under brew basket. The brewing process continues.

Important: To avoid possible overflow after removing the carafe, be sure to replace the carafe under the brew basket within 30 seconds to prevent the basket from overflowing.

Care and Cleaning

This product contains no user serviceable parts. Refer service to qualified service personnel.

CLEANING

1.Be sure the unit is off and cooled. Open the one-piece water reservoir and brew basket lid, remove the brew basket (lift straight up), and discard the paper filter/grounds. Clean as follows: brew basket, carafe, and carafe lid are all top rack dishwasher-safe; or they may be hand washed in warm, sudsy water. See below for carafe care. The coffeemaker’s exterior, control panel area and "Keep Hot" plate may be cleaned with a soft damp cloth. Do not use abrasive cleansers or scouring pads. Never immerse the coffeemaker in water.

2. To clean inside, open the one-piece water reservoir and brew basket lid. Wipe surfaces with a damp cloth, close the one-piece water reservoir and brew basket lid (A).

Carafe Care

A damaged carafe may result in possible burns from a hot liquid. To avoid breaking:

•Do not allow all liquid to evaporate from the carafe while on the "Keep Hot" plate or heat the carafe when empty.

•Discard the carafe if chipped, cracked, or damaged in any manner.

•Never use abrasive scouring pads or cleansers; they will scratch and weaken the glass.

•Do not place the carafe on or near a gas or electric burner, in a heated oven, or in a microwave oven.

•Avoid rough handling and sharp blows.

Mineral Deposits and Clogging

Mineral deposits left by hard water can clog your coffeemaker. Cleaning is recommended every 3 months. Excessive steaming or a prolonged brewing cycle is a sign that a cleaning is needed. The frequency of flushing out deposits is affected by your usage and water hardness. During cleaning, more steaming occurs than when brewing coffee and may emit spurts of steam.

1.Pour white vinegar into water reservoir up to 6-cup level on water viewer. Add water up to 12-cup line.

2.Put a paper filter in the brew basket and close the cover. Set empty carafe on the "Keep Hot" plate.

3.Turn on coffeemaker and let half the cleaning solution brew into carafe (till water level goes down to around "5"). Turn off coffeemaker and let it soak for at least 15 minutes to soften the deposits.

4.Turn on coffeemaker and brew remaining cleaning solution into carafe.

5.Turn off coffeemaker, empty carafe and discard soiled filter.

6.Fill reservoir with water to 12-cup line, replace empty carafe, then turn on coffeemaker for a complete brew cycle to flush out remaining cleaning solution. You may have to repeat this to eliminate the vinegar smell/taste.

7.Wash the brew basket and carafe as instructed in "CLEANING".

DE711 specifications

The Black & Decker DE711 is a highly regarded power tool designed specifically for professionals and DIY enthusiasts alike. Known for its versatility and robust construction, the DE711 has features that cater to a wide range of drilling and fastening applications, making it an essential addition to any workshop or toolkit.

One of the standout features of the DE711 is its variable speed control, which allows users to adjust the speed of the tool to suit different materials and tasks. This capability is particularly valuable, as it permits precision drilling in wood, metal, and plastic without the risk of damaging the workpiece. The tool typically boasts a maximum speed of around 2,500 revolutions per minute, enabling efficient drilling and driving capabilities.

The DE711 is equipped with a powerful motor that provides strong torque, ensuring that it can handle tougher tasks without straining. This is particularly advantageous for heavy-duty applications, such as when working with hardwoods or dense materials. Additionally, the tool's lightweight design minimizes fatigue during extended use, allowing for enhanced comfort and control.

Another notable characteristic of the DE711 is its 1/2-inch keyless chuck. This innovation simplifies bit changes, allowing users to quickly swap out bits without the need for additional tools. The keyless chuck design is particularly user-friendly, as it permits fast transitions between different screw sizes and drilling bits.

Durability is a key aspect of the DE711's construction. Built with high-quality materials, the power tool is designed to withstand the rigors of frequent use in various environments. Its rugged design helps protect internal components and ensures longevity, making it a reliable choice for contractors and serious hobbyists.

Additionally, the DE711 often features a built-in LED work light that illuminates dark workspaces, providing excellent visibility when working in tight or dimly lit areas. This thoughtful addition greatly enhances the usability of the tool, ensuring precision and accuracy in every task.

In terms of safety, the DE711 comes with an ergonomic grip that provides a secure and comfortable hold, reducing the likelihood of slips or accidents during operation. This attention to user comfort and safety makes the DE711 a favored choice among those who prioritize both performance and ease of use.

Overall, the Black & Decker DE711 is a powerful, versatile, and user-friendly tool that excels in a wide array of drilling and fastening tasks. With its innovative technologies and reliable performance, it stands out as a top choice for anyone looking to achieve professional-quality results in their projects.