How to Use
This appliance is for household use only.
GETTING STARTED
1.For warranty verification, do not remove line cord tag.
2.Please go to www.prodprotect.com/applica to register your warranty.
3.Wash the coffee grinding bowl, mini food processor workbowl and blades for both in hot soapy water, rinse and dry thoroughly as directed in the Care and Cleaning section of this Use & Care manual.
Important: Although these parts can be washed in the dishwasher, we recommend they be washed by hand to preserve the sharpness of the blades and the appearance of the workbowl. Do not immerse the appliance in water.
4. Wipe outside of appliance with a damp cloth; dry thoroughly.
Note: For your protection this appliance has a dual safety mechanism. Do not attempt to use this appliance unless either container with the appropriate blade is in place.
GRINDING COFFEE BEANS
1.Place the grinding blade on the spindle in the center of the grinding bowl making sure the blade rests at the bottom of the stem. With your fingers on the top of the stem of the grinding blade give it a twisting motion to make sure it is securely seated on the spindle (M).
M
Important: Handle grinding blade carefully. It is very sharp.
2.Place desired amount, up to ¾ cup (70 g), of coffee beans into the grinding bowl.
3.With your fingers on the top of the stem of the grinding blade use a twisting motion to make sure the coffee beans are evenly distributed in the grinding bowl.
4.Holding the grinding bowl from the bottom securely insert it up into the center of the bottom of the motor housing with the arrow signage on the bowl directly under the UNLOCK 
signage on the bottom of the motor housing (N).
9 | N |
5.Turn the grinding bowl clockwise until it locks into position. The LOCK 
signage on the housing should be aligned with the arrow on the grinding bowl.
Note: There is a safety feature on this appliance that will not allow the grinder to operate unless the workbowl is securely in place.
6.Plug in the appliance.
7.Press and hold the ON/OFF (I/O) control button(P).
P
Note: To stop the coffee grinder at any time, remove your finger from the ON/OFF (I/O) button.
8.When the coffee beans are ground to the desired texture release the ON/OFF (I/O) button.
Important: Be sure grinding blade has completely stopped spinning before removing workbowl from appliance.
9.Hold the grinding bowl securely and turn it counterclockwise to the UNLOCK 
position and keeping the bowl level, lower it from the appliance.
10.With your fingers on the top of the stem of the blade, lift it up and out of the work bowl with a twisting motion. Spoon the coffee directly from the bowl.
11.Clean the bowl after each use as described in CARE and CLEANING.
Note: Do not use the grinder for spices; the bowl will absorb some of the flavor of the spices and affect the flavor of the coffee.
12. Unplug the appliance when not in use.
GRINDING GUIDELINES
Selecting the grind setting:
| Brew Method | Grind Setting | Appearance |
|
| Percolator or French Press | Coarse | Like salt particles |
|
| Drip or Vacuum | Medium | Like sand particles |
|
| Espresso | Fine | Like talcum powder |
|
| Turkish | Extra Fine | Like flour |
|
|
|
|
|
|
The proper grind is important for the best coffee flavor. The quicker the brewing process is, the finer the grind used. Coffee that is ground too fine for a particular brewing process will result in bitter, pungent tasting coffee. Coffee that is ground too coarse will result in weak, watery coffee.
10