Important: Process foods no more than a few seconds at a time. Pulsing produces excellent results and offers greater control.
8.When the food is processed to the desired consistency release the ON/OFF (I/O) button.
Important: Be sure chopping blade has completely stopped spinning before removing workbowl from appliance.
9.Hold the workbowl securely and turn it counterclockwise to the UNLOCK 
position and keeping the bowl level, lower it from the appliance.
10.With your fingers on the top of the stem of the chopping blade, lift it up and out of the workbowl with a twisting motion. Remove food using rubber spatula or simply invert workbowl onto plate, bowl or work surface.
11.Unplug appliance when not in use.
HELPFUL TIPS FOR CHOPPING AND BLENDING
•The processor works very quickly. Watch carefully to avoid
•For best results, process foods that are about the same size.
•Cool cooked foods before processing.
•Do not overload the processor by adding more than 1¼ cups of food in the workbowl at one time.
•Use this processor to prepare small amounts of cooked fruits and vegetables for baby food.
•Cut hard foods, such as chocolate, whole hard spices and cheese into smaller pieces before processing to avoid damaging the blade.
Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified service personnel.
1.Remove the bowl from the mounted unit by twisting to the unlock position.
2.Carefully remove the blade from the bowl.
Important: Blades are sharp. Handle carefully.
3.The coffee grinding bowl, mini food processor workbowl and stainless steel chopping and grinding blades can be washed in hot, soapy water.
4.Always rinse and dry parts thoroughly after cleaning
Important: Although these parts can be washed in the dishwasher, we recommend they be washed by hand to preserve the sharpness of the blades and the appearance of the workbowl. Do not immerse the appliance in water.
5. Wipe outside of appliance with a damp cloth; dry thoroughly.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | SOLUTION |
|
| Grinder stops | The ground coffee bowl | Make sure the grinding bowl |
|
| working | has disengaged. | is correctly inserted into |
|
|
| There are too many beans | the motor housing. Unplug |
|
|
| in the grinding bowl. | the appliance and remove |
|
|
|
| some of the beans from the |
|
|
|
| grinding bowl. |
|
| Coffee tastes | Grinder has buildup of | Oil in the coffee beans |
|
| rancid. | coffee grounds. | will become rancid if left |
|
|
|
| in the grinder. Makes sure |
|
|
|
| there are no beans left in |
|
|
|
| the grinding bowl. Clean |
|
|
|
| the grinding bowl after |
|
|
|
| each use. |
|
| Coffee tastes like | Grinder has been used for | Grinder will share flavors; |
|
| nuts or spices. | other grinding operations. | purchase an additional |
|
|
|
| grinding bowl for spices |
|
|
|
| and nuts. |
|
| Appliance will | Workbowl or grinding bowl | Be sure the arrow on the |
|
| not start. | is not correctly engaged in | bowl is correctly aligned |
|
|
| the housing. | with the LOCK signage on |
|
|
| Appliance may not be | the housing and the bowl |
|
|
| plugged in. | is completely integrated |
|
|
| The outlet is not working. | and flush with the base |
|
|
|
| Check to make sure |
|
|
|
| appliance is plugged in |
|
|
|
| and outlet is working. |
|
| Food is unevenly | Workbowl is over filled. | Unplug the appliance and |
|
| chopped | Food may be cut in | remove some of the food |
|
|
| random sizes. | from the workbowl. |
|
|
|
| Smaller amounts |
|
|
|
| will process more evenly. |
|
|
|
| Press the ON/OFF |
|
|
|
| button in 5 second or |
|
|
|
| fewer increments. Allow |
|
|
|
| the blades to stop |
|
|
|
| completely before pressing |
|
|
|
| the ON/OFF button again. |
|
|
|
| Check the size of the food |
|
|
|
| before continuing. Cut |
|
|
|
| food in same size pieces |
|
|
|
| before placing in |
|
|
|
| processor. |
|
|
|
|
|
|
13 | 14 |