If the Defrost Timers Battery Loses Power

If the Defrost Timer's Battery Loses Power

If the SET CLOCK, PROGRAM and DEFROST ON lights are all blinking (Fig. 15), the backup power supply (battery) to the Defrost Timer has weakened. Estimated battery life is 10 years. The timer can continue to function normally after the battery has weakened if the timer is reprogrammed.

If a power outage occurs and is later restored after the battery has weakened, the following three things happen:

•The defrost clock resumes as if it were 12:00 midnight.

•The position of the switches dictates the defrost schedule. If all switches are OFF, the factory preset times of 2 AM, 8 AM, 2 PM and 8 PM will initiate defrost cycles 2, 8, 14 and 20 hours after power was restored.

•The factory preset defrost duration of 25 minutes is re-invoked.

Because the clock resumed at 12:00 midnight, it must be reset to the current time-of-day to avoid inconvenient defrost cycles. Refer to Setting the Time Clock to the Current Time-of-Day (page 7).

If the Defrost Duration was set at a value other than the factory preset 25 minutes, reset it. If power is lost again, reset again. Refer to Setting the Defrost Duration (page 7).

If you are using a custom Defrost Schedule, the switches must be reset after resetting the time and Defrost Duration. Any defrost start times that are set by the positions of the program switches will override the factory preset defrost start times even if the battery is weakened.

If the battery has weakened and reprogramming the time-of-day, defrost duration and schedule after a power interruption is too inconvenient, the Electronic Defrost Timer can be replaced.

In the event of a power surge or lightning, the SET CLOCK, PROGRAM and DEFROST ON lights will all blink the same as for a weak battery but the battery may not have weakened. First, try to reprogram the Defrost Timer. If the Defrost Timer fails to function normally, contact service.

– 10 –

D Series specifications

The Hobart D Series represents a sophisticated line of commercial dishwashing machines designed to streamline the dishwashing process in various food service environments. Renowned for their reliability and efficiency, these machines are engineered to meet the rigorous demands of busy kitchens while delivering superior cleaning results.

One of the standout features of the Hobart D Series is its energy efficiency. These machines utilize advanced wash technology that conserves water and energy without compromising on performance. By leveraging innovative wash systems, the D Series can achieve optimal cleaning results with reduced water usage, making it an environmentally friendly choice for businesses looking to lower their operational costs.

The D Series also integrates state-of-the-art control systems for enhanced usability. The intuitive control panel allows users to select wash cycles with ease, ensuring that each load is treated with the appropriate level of care. This is particularly beneficial in high-volume settings where speed and efficiency are paramount. Additionally, many models within the D Series come equipped with programmable cycles, allowing for customization based on specific cleaning needs.

Durability is another key characteristic of the Hobart D Series. Constructed with high-quality stainless steel, these dishwashers are designed to withstand the rigors of a commercial kitchen environment. The robust design not only enhances longevity but also simplifies maintenance, as the smooth surfaces are easy to clean and resistant to corrosion.

The Hobart D Series incorporates advanced filtration systems that effectively remove food particles from the wash water, ensuring that each cycle delivers clean, spotless dishes. This filtration capability is essential in maintaining hygiene standards while reducing the frequency of water changes, further contributing to operational efficiency.

Moreover, the D Series models feature a compact design, making them suitable for kitchens with limited space. Despite their smaller footprint, they are capable of handling large volumes of dishes, pots, and utensils, ensuring that meal service flows seamlessly.

In addition to their functional attributes, Hobart's commitment to innovation is evident in their ongoing improvements to the D Series. With a focus on user experience, sustainability, and performance, the Hobart D Series stands out as a leader in commercial dishwashing solutions, providing businesses with the tools needed to operate efficiently and effectively in a competitive industry. Overall, the Hobart D Series embraces cutting-edge technology and robust design to support the needs of modern food service operations.