Hobart D Series manual Legs or Casters, Casters Fig, Shelves Fig, Compressor Mounts

Page 4

LEGS OR CASTERS

WARNING: THE CABINET MUST BE BLOCKED AND STABLE BEFORE INSTALLING LEGS OR CASTERS.

Legs (Fig. 4)

THREADED HOLE

To install the legs, raise and block the reach-in a minimum of 7" from the floor and thread the legs into the threaded holes on the bottom of the cabinet. The unit must be level in order to operate properly. Turn the adjustable feet in or out as required to level the unit front-to-back and side-to-side.

NOTE: Three-section front opening cabinets come with five legs; the fifth leg should be placed in the front center threaded hole. Failure to install these legs in the proper location may result in damage to the cabinet.

Casters (Fig. 5)

Use casters only on reach-in models that have cord and plug electrical connections.

Raise and block the cabinet a minimum of 7" from the floor. Thread the casters into the holes in the bottom of the cabinet (Fig. 6). Casters with brake should be installed at the front. Securely tighten the caster with the octagon shaped bolt head underneath — not the round flange on top.

Shelves (Fig. 6)

If purchased, the shelves and shelf clips are shipped with the cabinet. Insert the shelf clips into the pilaster and install the shelves. Index holes are provided in the pilaster to help in leveling the shelves.

RAISE LOWER

PL-56125

Fig. 4

BOLT

PL-53353

Fig. 5

Bonus shelves are provided to fill the space between the shelves. These are positioned and supported by the shelves.

NOTE: Loosen all thumbscrews which secure shelf pilasters and light cover(s) prior to placing product in the cabinet. Thumbscrews should be loose enough to remove with your fingers so parts can be readily removed for cleaning without the use of tools. Failure to comply with this request will invalidate the NSF listing.

Compressor Mounts

Some reach-in refrigeration models have the compressor specially mounted to help prevent damage during shipment. If the compressor is mounted on shipping blocks, remove the shipping blocks before operating the compressor. If the compressor is mounted on springs, refer to the tag attached to the compressor.

 

PILASTER

COLD AIR

 

DUCT

 

 

INDEX

BONUS

HOLE

 

SHELF

SHELF

 

CLIP

 

SHELF

PL-50910

 

Fig. 6

– 4 –

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Series REACH-IN Refrigerators & Freezers Installation Series REACH-IN Refrigerators & FreezersGeneral UnpackingAssembly Door HingingLegs or Casters Casters FigShelves Fig Compressor MountsCondensate Evaporator OperationPRE-START Checks Electronic Defrost Timer when equipped Programming the Electronic Defrost TimerSetting the Time Clock to the Current Time-of-Day Setting the Defrost DurationHow to Set a Custom Defrost Schedule Program Review Cancelling a Defrost CycleInitiating a Manual Defrost If the Defrost Timers Battery Loses Power Page Maintenance TroubleshootingCleaning Warranty

D Series specifications

The Hobart D Series represents a sophisticated line of commercial dishwashing machines designed to streamline the dishwashing process in various food service environments. Renowned for their reliability and efficiency, these machines are engineered to meet the rigorous demands of busy kitchens while delivering superior cleaning results.

One of the standout features of the Hobart D Series is its energy efficiency. These machines utilize advanced wash technology that conserves water and energy without compromising on performance. By leveraging innovative wash systems, the D Series can achieve optimal cleaning results with reduced water usage, making it an environmentally friendly choice for businesses looking to lower their operational costs.

The D Series also integrates state-of-the-art control systems for enhanced usability. The intuitive control panel allows users to select wash cycles with ease, ensuring that each load is treated with the appropriate level of care. This is particularly beneficial in high-volume settings where speed and efficiency are paramount. Additionally, many models within the D Series come equipped with programmable cycles, allowing for customization based on specific cleaning needs.

Durability is another key characteristic of the Hobart D Series. Constructed with high-quality stainless steel, these dishwashers are designed to withstand the rigors of a commercial kitchen environment. The robust design not only enhances longevity but also simplifies maintenance, as the smooth surfaces are easy to clean and resistant to corrosion.

The Hobart D Series incorporates advanced filtration systems that effectively remove food particles from the wash water, ensuring that each cycle delivers clean, spotless dishes. This filtration capability is essential in maintaining hygiene standards while reducing the frequency of water changes, further contributing to operational efficiency.

Moreover, the D Series models feature a compact design, making them suitable for kitchens with limited space. Despite their smaller footprint, they are capable of handling large volumes of dishes, pots, and utensils, ensuring that meal service flows seamlessly.

In addition to their functional attributes, Hobart's commitment to innovation is evident in their ongoing improvements to the D Series. With a focus on user experience, sustainability, and performance, the Hobart D Series stands out as a leader in commercial dishwashing solutions, providing businesses with the tools needed to operate efficiently and effectively in a competitive industry. Overall, the Hobart D Series embraces cutting-edge technology and robust design to support the needs of modern food service operations.
Top Page Image Contents