Hobart D Series manual Operation, Condensate Evaporator, PRE-START Checks

Page 5

Condensate Evaporator

D Series units are equipped with an automatic condensate evaporator that requires no drain connection.

ELECTRICAL CONNECTIONS (Cord Connected Reach-Ins) 120Volt, 60 Hertz, 1 Phase

WARNING: THIS MACHINE IS PROVIDED WITH A THREE-PRONGED GROUNDING PLUG. THE OUTLET TO WHICH THIS PLUG IS CONNECTED MUST BE PROPERLY GROUNDED. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN.

ELECTRICAL CONNECTIONS (Permanently Connected Reach-Ins)

WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES.

WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THAT YOU ARE WORKING ON THE CIRCUIT.

Make electrical connections per the wiring diagram supplied with the unit.

PRE-START CHECKS

REFRIGERANT LINES — Check for tubing shifts due to shipping that would cause operating noise, wear or leaks.

OPERATIONAL CHECK — The refrigeration and defrost cycles should be checked for proper operation before food product is stored in the cabinet.

DEFROST TIMER — On freezer units, set the defrost timer as described in Operation.

OPERATION

TEMPERATURE CONTROL — The temperature control is set at the factory but local conditions may necessitate slight adjustment. To adjust the temperature control, lift up and remove the front trim panel (Fig. 2). Turn the control knob (Fig. 7) a small amount at a time. Turning the control knob in the direction of the arrow lowers the temperature. The control knob has a marked OFF position which interrupts power to the compressor and condenser fan only, not the entire reach-in.

THERMOMETER — The drum thermometer (upper right corner) indicates the cabinet temperature.

TEMPERATURE

CONTROL

PL-56151

Fig. 7

– 5 –

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Series REACH-IN Refrigerators & Freezers Series REACH-IN Refrigerators & Freezers InstallationGeneral UnpackingDoor Hinging AssemblyCasters Fig Legs or CastersShelves Fig Compressor MountsPRE-START Checks OperationCondensate Evaporator Programming the Electronic Defrost Timer Electronic Defrost Timer when equippedSetting the Defrost Duration Setting the Time Clock to the Current Time-of-DayHow to Set a Custom Defrost Schedule Initiating a Manual Defrost Cancelling a Defrost CycleProgram Review If the Defrost Timers Battery Loses Power Page Troubleshooting MaintenanceCleaning Warranty

D Series specifications

The Hobart D Series represents a sophisticated line of commercial dishwashing machines designed to streamline the dishwashing process in various food service environments. Renowned for their reliability and efficiency, these machines are engineered to meet the rigorous demands of busy kitchens while delivering superior cleaning results.

One of the standout features of the Hobart D Series is its energy efficiency. These machines utilize advanced wash technology that conserves water and energy without compromising on performance. By leveraging innovative wash systems, the D Series can achieve optimal cleaning results with reduced water usage, making it an environmentally friendly choice for businesses looking to lower their operational costs.

The D Series also integrates state-of-the-art control systems for enhanced usability. The intuitive control panel allows users to select wash cycles with ease, ensuring that each load is treated with the appropriate level of care. This is particularly beneficial in high-volume settings where speed and efficiency are paramount. Additionally, many models within the D Series come equipped with programmable cycles, allowing for customization based on specific cleaning needs.

Durability is another key characteristic of the Hobart D Series. Constructed with high-quality stainless steel, these dishwashers are designed to withstand the rigors of a commercial kitchen environment. The robust design not only enhances longevity but also simplifies maintenance, as the smooth surfaces are easy to clean and resistant to corrosion.

The Hobart D Series incorporates advanced filtration systems that effectively remove food particles from the wash water, ensuring that each cycle delivers clean, spotless dishes. This filtration capability is essential in maintaining hygiene standards while reducing the frequency of water changes, further contributing to operational efficiency.

Moreover, the D Series models feature a compact design, making them suitable for kitchens with limited space. Despite their smaller footprint, they are capable of handling large volumes of dishes, pots, and utensils, ensuring that meal service flows seamlessly.

In addition to their functional attributes, Hobart's commitment to innovation is evident in their ongoing improvements to the D Series. With a focus on user experience, sustainability, and performance, the Hobart D Series stands out as a leader in commercial dishwashing solutions, providing businesses with the tools needed to operate efficiently and effectively in a competitive industry. Overall, the Hobart D Series embraces cutting-edge technology and robust design to support the needs of modern food service operations.
Top Page Image Contents