Euro-Pro KM550E owner manual Cleaning & Storage, How To Attach the Hand Mixer to Stand

OPERATING INSTRUCTIONS
How To Attach the Hand Mixer to	Fig.3
the Stand
• The stand for the Power Mixer has
two tabs on top. (Fig. 1)
• The power mixer has two slots
next to the holes for inserting the
attachments. (Fig. 2)
• Hold the power mixer in your right
hand at an angle. Slide it from left
to right securing the two tabs on
the stand into the two slots on the
power mixer. (Fig. 3)
• Push the power mixer down on
the stand to engage the lock
(Fig. 4) that secures the power	Fig. 4
mixer to the stand. (Fig. 5)

Note: To lock the power mixer onto the stand more easily, push the lock release button as you are lowering the power mixer down onto the stand. (Fig. 6)

Fig.1

Fig.5

OPERATING INSTRUCTIONS

How To Remove the Hand Mixer to
the Stand	Fig. 8
• To remove the power mixer from
the stand, push the lock release
button and lift the power mixer
upwards. (Fig. 7)
• In order to lift the power mixer
while it is still on the stand, push
the locking button and pull the
power mixer upwards. (Fig. 8 & 9)
Fig.7

Fig. 9

CLEANING & STORAGE

Fig.2

Fig.6

•Ensure that the mixer is unplugged and switched off before removing and cleaning the attachments.

•Wash the beaters and glass bowl in warm, soapy water or dishwasher.

•Clean the stand by wiping with a damp cloth.

•Never immerse the power mixer in water or any other liquid.

•Push the cord rewind button while holding the plug for the cord to rewind.

•You can store 1 set of the attachments on the side of the stand for easier storage.

Caution: Do not pull with force on the power cord or you will damage the rewinding feature and void the warranty. When rewinding, always hold the plug to avoid cord whipping.

5 6