Kenwood MAJOR KM040, CHEF KM030 manual Troubleshooting, To fit and use your splashguard, Problem

Page 6

KENWOOD CHEF AND MAJOR KM030 – KM040 series

troubleshooting

problem

The whisk or K-beater knocks against the bottom of the bowl or isn’t reaching the ingredients in the bottom of the bowl.

solution Adjust the height. Here’s how:

1Unplug.

2Raise the mixer head and insert the whisk or beater.

3Hold it, then loosen the nut

4Lower the mixer head.

5Adjust the height by turning the shaft. Ideally the whisk/K-beater should be almost touching the bottom of the bowl

6Raise the head, hold the whisk/K-beater and tighten the nut.

problem

The mixer stops during operation.

solution Your mixer is fitted with an overload protection device and will stop if overloaded to protect the machine. If this happens, unplug the mixer. Remove some of the ingredients to reduce the load, and allow the mixer to stand for a few minutes. Plug in and press the start/stop button. If the mixer does not restart immediately allow to stand for additional time.

If for any reason power to the mixer is interrupted and the machine stops working, switch off by pressing the on/off button, wait a few seconds and then switch on again. The mixer should resume operating straight away.

to fit and use your splashguard

1Raise the mixer head until it locks.

2Fit the bowl onto the base.

3 Push the splashguard onto the underside of the mixer head until fully located. The hinged section should be positioned as shown.

4Insert required tool.

5Lower the mixer head.

During mixing, ingredients can be added directly to the bowl via the

hinged section of the splashguard .

You do not need to remove the splashguard to change tools.

CHEF

1

min

P

3

4

2

1

n mi

P

5

Image 6
Contents Instructions Know your Kenwood kitchen machine SafetyBefore using for the first time Before pluggingKnow your Kenwood kitchen machine Control panelTo use your mixer Speed switchMixing tools and some of their uses Rubbing fat into flour minStiff yeast dough Maximum capacitiesShortcrust pastry Soft yeast doughTroubleshooting ProblemTo fit and use your splashguard Attachments available Page Service and customer care Cleaning and serviceCare and cleaning Guarantee UK onlyRecipes PavlovaHoney and nut spread using the liquidiser Scrumptious chocolate cakeChocolate mousseline filling Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK

CHEF KM030, MAJOR KM040 specifications

The Kenwood MAJOR KM040 and CHEF KM030 stand out in the world of kitchen appliances for their versatility, efficiency, and impressive range of features. Both models belong to Kenwood's esteemed line of stand mixers, designed to cater to both amateur cooks and professional chefs.

The MAJOR KM040 is a powerful kitchen machine that features a robust 1500-watt motor, allowing for efficient mixing, kneading, and blending of even the toughest ingredients. Its 6.7-liter stainless steel bowl offers ample capacity for large batches, making it perfect for families or event catering. The KM040 is equipped with a variety of attachments, including a dough hook, K-beater, and whisk, allowing users to tackle a wide range of culinary tasks, from bread and pastry making to whipping cream or egg whites. This model is also built with a 3 bowl speed and a pulse function for precise control.

In contrast, the CHEF KM030 is a slightly smaller model but boasts its own unique set of features. With a 1000-watt motor, it is still powerful enough to handle most mixing jobs. The CHEF KM030 comes with a 4.6-liter stainless steel bowl, making it ideal for home bakers who don't require the larger capacity of the MAJOR. It offers similar attachments, including the K-beater and dough hook, plus it has a planetary mixing action that ensures thorough and consistent mixing results.

Both models employ Kenwood's signature EasyDirectional design, which allows for easy access to the bowl and attachments while reducing the risk of spills. Additionally, they feature a built-in safety mechanism that prevents the machine from operating if the head is tilted, ensuring user safety during operation. Another highlight is the compatibility with various optional attachments, including food processors, pasta makers, and blenders, enabling the user to expand the machine's capabilities significantly.

Durability is a key characteristic of both the MAJOR and CHEF models, thanks to their high-quality construction and materials. The design is not only functional but also attractive, with a sleek aesthetic that fits well in any modern kitchen. Cleaning is streamlined with removable parts that are dishwasher safe, making post-cooking cleanup a breeze.

In conclusion, whether choosing the more powerful MAJOR KM040 or the compact CHEF KM030, users can expect high performance and versatility, transforming their culinary adventures with ease. These stand mixers embody Kenwood's commitment to quality and innovation, ensuring every cooking experience is enjoyable and efficient.