Installation Instructions, Water Pressure

SAVE THESE INSTRUCTIONS

WARNING

Instructions pertaining to a risk of fire, electric shock, or injury to persons.

Electrical Instructions:

An electrical supply of 220-240 volts AC only, 50Hz is required. Make sure that a suitable electrical supply socket is located close to where the dishwasher is to be placed. For your personal safety, the appliance must be earthed. The appliance is equipped with a power supply cord having a 3-pin plug. To minimize possible shock hazards it must be plugged into a matching 3-pin type electrical outlet.

If the mains plug is unsuitable for the socket outlet in your home or is removed for any other reason, then the cut off plug should be disposed of safety to prevent the hazard of electric shock.

Installation Instructions

1.Remove all packing materials carefully

2.Use the supplied hose. Do not reuse old hoses.

3.The water inlet hose from the machine terminates in a ¾” female connector. The water supply should therefore terminate in a similar male connector and should have a stopcock close by in the pipe. It is recommended to connect the machine to hot water supply. Connect the straight connector of the inlet hose to the water supply securely. Connect the other end (bent connector) to the water inlet valve at the back of the dishwasher cabinet. Do not over-tighten to avoid damage to threads.

4.Prepare the drainage hose so that it has hooked end. Use the plastic U-bend fitting provided for this purpose. The end of this should be dropped into a drainage standpipe, the maximum height of which should be no more than 6” above the base of the dishwasher. To allow for an air gap around the end of the drain hose, the diameter of the standpipe should be at least 30 mm. Connect the other end of the drain hose (L shaped) to the drain port connection at the back of the dishwasher cabinet. Tighten the drain hose end on to the drain port using the metal clip included in the package.

5.If you so wish, you may connect the water inlet hose on to the kitchen sink tap. You must obtain correct fittings/adaptors to match the inlet hose connectors to ensure secure connection. However, permanent plumbing is recommended.

6.If leaks are located, immediately shut the water supply and check the hose connections fully. Tighten connections if necessary.

7.If for any reason you are unable to stop the leak yourself please seek advice from a qualified plumber.

8.The minimum height clearance required to install your dishwasher on a countertop surface with overhead cupboards is 19” (48cm).

9.Make sure there is an electrical power supply within easy reach of the machine. The power cord is 210cm long.

10.The dishwasher must be installed on a ‘firm’ level surface.

11.To level the dishwasher, adjust the 4 level screws (feet) under the dishwasher.

Water Pressure

For best operating results, incoming water pressure should be between 0.03~1Mpa. Incoming water supply for the dishwasher is controlled by a ‘low water switch’ application, so if household water closedown, dishwasher will stop.

KDW4TTSL specifications

The Kenwood KDW4TTSL is a versatile and efficient dishwasher designed for modern kitchens, combining functionality and sleek design. With a compact size, this appliance is perfect for small households or apartments, ensuring you have a reliable cleaning solution without taking up excessive space.

One of the standout features of the KDW4TTSL is its energy efficiency. This appliance has been designed to reduce water and energy consumption, achieving excellent cleaning results while remaining eco-friendly. With an A+ energy rating, it helps users lower their utility bills and minimize their environmental footprint.

The KDW4TTSL boasts a variety of wash programs tailored to meet the needs of different types of dishes. From intensive washes for heavily soiled pots and pans to quick washes for lightly soiled items, the dishwasher offers the flexibility necessary for various cleaning tasks. The eco wash program is particularly impressive, allowing consumers to save water and energy while still achieving spotless results.

Equipped with a 13-place setting capacity, the Kenwood KDW4TTSL accommodates a significant amount of dishes, silverware, and glassware in a single load. This feature is perfect for families or those who entertain frequently, reducing the number of washing cycles required.

Another notable characteristic is the adjustable racks and foldable tines, allowing users to easily customize the interior layout to fit larger items. This means you can easily load tall pots or delicate glassware without hassle. Additionally, the dishwasher features a cutlery basket and dedicated spaces for long utensils, ensuring everything is thoroughly cleaned.

The KDW4TTSL is designed with user convenience in mind. With a delay start function, users can program the dishwasher to start at a time that suits their schedule, whether it’s during off-peak energy hours or overnight while they're asleep. The digital display makes it easy to monitor the current wash cycle and remaining time, enhancing the user experience.

Moreover, this model is equipped with advanced noise reduction technology, operating quietly at 49 dB. This ensures that even during its most powerful cycles, it won't disrupt your household activities or conversations.

In conclusion, the Kenwood KDW4TTSL combines efficiency, flexibility, and modern technology to meet the demands of today's busy lifestyles. With its array of features and thoughtful design, it is an excellent addition to any kitchen, delivering powerful cleaning performance while promoting energy and water savings. Whether you’re a busy family or an individual who loves to entertain, the KDW4TTSL caters to all your dishwashing needs with ease and style.