Hobart HM1600 manual Installation, Unpacking, Removal of Protective Film, Location

Page 6

INSTALLATION

UNPACKING

Immediately after unpacking the microwave oven, check for possible shipping damage. If this oven is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.

Removal of Protective Film

A blue protective film is used to prevent scratching of the outer case during transportation. Peel the film from the exterior of the oven before installation or use.

LOCATION

Locate the oven on a smooth, flat and stable surface. There should be no gap between the counter surface and the bottom of the oven. Do not place the oven in a hot or damp area, i.e., near a gas or electric range. The microwave oven must not be located above or next to sources of excessive heat or greasy air. Free airflow around the oven is important. There is a possibility of a small amount of interference with weak broadcast signals if the microwave oven is too close to a radio or TV.

It is recommended that the microwave oven be located so the housing can be removed for service. The housing should NOT be removed by anyone except qualified service personnel. A Hobart service technician is recommended.

Sealing the Microwave Oven to the Countertop (Fig. 1)

When the microwave oven is placed on a countertop, the base must be sealed in accordance with the National Sanitation Foundation (NSF).

Locate microwave oven on a level countertop surface. Complete the electrical connections.

Thoroughly clean the base of the microwave oven and the countertop area around the oven.

Remove the air filters.

Apply a bead of silicone sealant around the base of the microwave oven. Smooth sealant with a wet finger or tool to provide a cove seal. Use a small bead of sealant so the filters can be reinstalled. Reinstall the air filters after the silicone sealant has been allowed to cure.

– 6 –

Image 6
Contents TI on Important Safety Instructions Page Table of Contents Model HM1600 Microwave Oven Radio Interference Removal of Protective Film InstallationUnpacking LocationElectrical Connections Grounding InstructionsOperation Controls FIGTimer Range Limits Power Level Chart approximate valuesFactory Preset MED LOW DEF Hold WattsManual Single Stage Heating Manual 2 or 3 Stage Heating Programmed Heating Programming Memory Pads Programming Memory Pads for 2 or 3 Stage Heating Program Features Auto Repeat Interrupt Program LockProgram Unlock List Memory Programming Beep Tone Loudness Programming Beep Tone DurationTo Read the Cycle Counter Cleaning the Air Filters MaintenanceCleaning Replacing a Light BulbFailure Codes TroubleshootingService Code Cause What to do

HM1600 specifications

The Hobart HM1600 is a powerful planetary mixer designed to meet the high demands of professional kitchens and food service operations. This robust mixer is especially valued for its performance, versatility, and ease of use, making it a staple in bakeries, pizzerias, and restaurants.

One of the main features of the HM1600 is its sturdy construction. Built with a die-cast aluminum body, the mixer is designed to withstand the rigors of daily use while providing excellent stability during operation. The stainless steel bowl, with a capacity of 60 quarts, is large enough to handle significant batches, making it ideal for high-volume production.

The HM1600 boasts a powerful heavy-duty 2 HP motor, ensuring consistent performance even when mixing dense doughs or heavy batters. This motor is equipped with a gear-driven transmission that offers a range of five different speed settings. These speeds cater to various mixing requirements, from kneading dough to whipping cream, allowing chefs to achieve the perfect consistency for their ingredients.

Another noteworthy characteristic of the Hobart HM1600 is its planetary mixing action. This technology involves the mixing attachment rotating around its own axis while also orbiting the bowl, ensuring thorough mixing from all angles. This results in a more uniform and consistent mixture, reducing the time needed for mixing tasks.

In terms of safety, the HM1600 is designed with a rear safety guard that protects users while allowing for easy access to the mixing bowl. The intuitive controls are mounted at the front, allowing for straightforward operation, even in busy kitchen environments. Additionally, the mixer features a robust bowl lift mechanism that facilitates easy installation and removal of the bowl.

The optional attachments for the HM1600, including various mixing tools like the flat beater, wire whip, and dough hook, enhance its versatility. These attachments allow the mixer to tackle a wide range of tasks, from mixing batters to kneading heavy dough.

In conclusion, the Hobart HM1600 is an exceptional mixer that combines robust construction, powerful performance, and versatile functionality. Its gear-driven transmission, planetary mixing action, and safety features make it a reliable choice for commercial kitchens seeking efficiency and consistency in their food preparation processes. Whether for baking bread, preparing large batches of pizza dough, or whipping up desserts, the HM1600 stands out as a durable and efficient solution for culinary professionals.