WEIGHT MODE
The scale is ready to weigh if the zero indicator is displayed when the platter is empty. Tare is permitted. Once invoked, the Tare value is set for all WEIGHT mode operations: Manual mode, Presets (P1 – P4), and Memory (M). The Tare value can be changed or turned off at any time. If SLICE is displayed, you
can revert back to WEIGHT mode by pressing the MODE key, 
.
TARE
The scale can tare up to 2 lb (or 1 kg) whenever the scale is in WEIGHT mode.
How to set a platter tare . . .
Place an empty meat tray on the platter and press Tare, 
.
How to set a known tare value . . .
Enter the known tare value, up to 2 lb (or 1 kg), by using the appropriate numeric keys and pressing
Tare, 
.
| NET |
| lb | P1 |
| - 8002 oz | P3 | ||
| . | slice | P2 | |
|
|
| ||
|
|
|
| |
|
|
| M | P4 |
|
|
|
|
|
NET | lb | P1 | |
slice | P2 | ||
|
- 8000 | oz | P3 | |
| . | M | P4 |
|
|
After the tare is set, the NET indicator will be lit. With no weight on the platter, the negative (tare)
weight will be displayed. With an empty meat tray on the scale; 0.00 lb NET weight displays.
To toggle tare off press the Clear key, 
.
lb vs. oz WEIGHING
To shift from lb weighing to oz weighing, press and hold the MODE key and press the 0 key. To shift from oz weighing to lb weighing, press and hold the MODE key and press the 1 key.
NET | lb | P1 | |
slice | P2 | ||
|
88000 | oz | P3 | |
| . | M | P4 |
| NET | lb | P1 |
|
| slice | P2 |
| |
|
| |||
| oz | P3 |
| |
| . | M | P4 |
|
|
|
|
|
|
NOTE: When equipped for metric weighing, the Mode key (with 0 or 1) shifts between kg and g similarly; the Mode key (by itself) shifts between WEIGHT mode and SLICE mode.
SLICE MODE
To go to SLICE mode from WEIGHT mode, press the MODE key, 
. This allows the slices to be counted. Unless you invoke one of the preset keys or memory, the slicer begins at 0 and counts up. The maximum number of slices that can be counted or programmed is 99.
NET | lb | P1 | |
SLICE | P2 | ||
|
88000 | oz | P3 | |
| . | M | P4 |
NOTE: The software version displays for a few seconds if you press the RT area of the HOBART logo.
– 8 –