Hobart 2812 88125, USING THE MEMORY KEY In Weight Mode, To count slices, change to SLICE mode

USING THE MEMORY KEY:

In Weight Mode . . .

You can enter the preset weight by using the numeric keys (for example, 125). The lb indicator will blink

and the preset weight, 1.25 lb, displays.
[ If you make a mistake, press the Clear key,	,

and reenter the numeric value, or press the key twice to restore the previous values.]

Press the Memory key, , to store the value in memory and display the actual platter weight (0.00).

NET	88000	lb	P1
		oz	P3
—> 0 —<	.	slice	P2
		M	P4
NET	88125	lb	P1
		oz	P3
—> 0 —<	.	slice	P2
		M	P4
NET	88000	lb	P1
		oz	P3
—> 0 —<	.	slice	P2
		M	P4

If you press the Memory key, , when there is weight on the platter, the platter weight will be saved in memory. The actual platter weight displays until you remove the product from the platter and the display returns to 0.00.

To briefly display the preset weight, press the Recall key, .

Set the Tare, if needed.

Set thickness. Slice product. When the platter weight reaches the preset weight, a beep sounds.

To count slices, change to SLICE mode . . .

Press the Mode key,	. Slice is displayed instead of the WEIGHT indicator, lb. Enter the number
of slices by using the numeric keys. Slice will blink until you press the Memory key,		.

NET	lb	P1
	slice	P2
—> 0 —<
	oz	P3
	M	P4

NET	lb	P1
	slice	P2
—> 0 —<
	oz	P3
	M	P4

Set thickness. Slice product. When the number of slices counts down to zero, a beep sounds.

The display can shift between WEIGHT and slice modes by pressing the Mode key, , at any time. [ The displayed weight will reflect the platter weight (less Tare, if NET was displayed).]

Repeat or exit. Exit by pressing the Memory key again.

– 11 –