Hobart N50 MIXER manual Electrical Supply and Connection, Commissioning and Operating Instructions

Page 10

ELECTRICAL SUPPLY AND CONNECTION.

The electrical installation of the mixer must be in accordance with the current edition of the IEE regulations for electrical equipment in buildings, Electricity at Work Act 1989 and must conform to the requirements of the Local Electricity Board.

The technical data shown in Table 1 details the electrical requirements for the mixer. Ensure that the electrical supply agrees with the machine specification, prior to connection.

It is recommended the mixer is connected to a suitable external electrical isolator (see Table 1 for electrical data) fitted with a residual current device (RCD) rated at 30mA, to provide short circuit and earth leakage protection.

The mixer is supplied with a cable and plug (which conforms to BS1363) and fitted with a 5A fuse (UK only).

COMMISSIONING AND OPERATING INSTRUCTIONS.

SAFETY INSTRUCTIONS.

THE ATTACHMENT AND/OR MIXER MUST ONLY BE USED BY A FULLY TRAINED AND COMPETENT PERSON.

The following instructions must be observed when using the mixer:

•Do not change speed while the mixer is operating.

•Do not wear loose clothing.

•Do not use the mixer or attachment if a fault develops or the machine is unsafe.

•Do not access rotating parts.

•Do not use excessive force when operating which could affect the stability of the mixer.

•Do not operate the mixer if parts are disassembled.

•Always use the attachment and/or mixer in a well lit area.

•Always ensure the bowl, bowl clamps, agitator, attachment and guard are correctly fitted to the machine.

•Always disconnect the mains electricity supply before cleaning.

•Always use the toggle switch ‘O’ to stop mixer.

•Always clean the bowl, agitators and attachments after use.

•Always clean mixer daily.

•Always service the mixer and attachments at least twice a year depending on the frequency of use.

– 10 –

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Truct ONS Page N50 Page Contents Safety Information Foreword LiabilityHygiene General InformationN50 Mixer Dimensions Location InstallationUnpacking Technical InformationElectrical Supply and Connection Commissioning and Operating InstructionsMixer Operation Mixer Component IdentificationMixing Chart Do not Exceed the Specified MIX QuantityMixer Speed Settings Mixer AgitatorsCleaning Before Initial USE Cleaning Procedure Mixer and AttachmentCleaning After USE Safety Instructions Using the Attachment FacilityFitting AN Attachment Food grinders and mincers Specific Attachment SafetyJuice extractors Can openersGrain mills Spaghetti makersFault Finding Recommended Spare PartsLondon & Home Counties Midland & Wales Service Information and AddressesAddresses Northern Scotland & Northern IrelandPage Installation Utilisation Maintenance Page Raccordement électrique Symboles D’ATTENTION AvertissementAVANT-PROPOS ResponsabiliteGeneralites N50 Dimensions Emplacement DeballageInstructions Operatoires Raccordement ElectriqueInformations DE Securite Utilisation Identification DES PiecesTableau 2. Capacites Cuisine RecommandeeTableau DE Charge D’UTILISATION NE PAS Depasser LES Quantites PrevuesSelecteur DE Vitesse LES OutilsNettoyage Apres Utilisation Procedure D’ENTRETIENNettoyage Avant Premiere Utilisation Ressort D’OUTILUtilisation DE LA Prise Accessoires Montage D’ACCESSOIRESOuvre-boîtes Presse agrumesHâchoirs Coupe-légumes, râpesService ET Entretien Moulin à grainsPieces Detachees Recommandees Identification DE PanneInstallation Betrieb Wartung Page Mit Ansatznabe Inhalt SeiteHaftung SicherheitshinweiseHygiene Allgemeine Hinweise BestimmungsgemäßeV erwendungVerwendete Werkstoffe Abmessungen Technische Daten InstallationAuspacken Betrieb Bild 2. AufbauNach Beendigung der Arbeit Bei Beginn der ArbeitAnwendungshinweise Geschwindigkeitseinstellungen Tabelle 2. Einsatz in der KücheTabelle 3. Einsatz in der Bäckerei / Konditorei Generell gilt folgendesBild 3 Rührwerkzeuge ReinigungBild 4. Rührwerkzeug-Druckfeder Betrieb von Ansatzgeräten Das Gerät nicht ohne den Ölauffangring betreibenFleischwolf DosenöffnerGetreidemühle Wartung und Reparatur4 Gemüseschneider NudelvorsatzFehlersuche ErsatzteileForm 23138

N50 MIXER specifications

The Hobart N50 mixer is a prominent choice for commercial kitchens that demand efficiency and reliability in their food preparation processes. Known for its durability and performance, the N50 mixer is a staple in bakeries, restaurants, and catering operations, designed to handle various mixing tasks with ease.

One of the primary features of the Hobart N50 mixer is its powerful motor, rated at 1/2 horsepower, which ensures consistent and thorough mixing of ingredients. This robust motor allows the mixer to handle dense doughs and large batches without compromising performance. The N50 is equipped with a gear-driven transmission that provides a range of mixing speeds, allowing operators to select the perfect speed for their specific tasks, from slow and gentle mixing to faster, more vigorous blending.

The N50's 5-quart stainless steel bowl is designed for maximum capacity and efficiency. This spacious bowl is ideal for a variety of recipes, from small quantities of frosting to larger batches of dough. The stainless steel construction not only provides durability but also makes it easy to clean, a significant consideration in any busy kitchen environment.

Another notable aspect of the Hobart N50 mixer is its user-friendly design. The mixer features a simple, ergonomic control panel that allows for easy operation. The bowl can be raised and lowered with a single lever, providing convenient access for adding ingredients or removing the finished product. Additionally, the mixer includes a clear and intuitive speed control knob, facilitating quick adjustments while mixing.

The N50 is equipped with various attachments that expand its versatility. The standard equipment includes a flat beater, wire whip, and dough hook, enabling the mixer to tackle a wide range of culinary tasks. Optional accessories are available, allowing operators to customize their mixer to suit their specific needs, whether they're whipping cream, kneading dough, or preparing batter.

Hobart is recognized for integrating advanced technologies into their equipment, and the N50 mixer is no exception. The mixer is designed with safety features, such as a safety overload switch that prevents damage from unnecessary strain, ensuring longevity and reliability.

In conclusion, the Hobart N50 mixer stands out with its powerful motor, durable construction, user-friendly features, and versatility for various culinary tasks. It’s an essential tool that combines superior performance with thoughtful technology, making it a trusted choice for foodservice professionals worldwide.
Top Page Image Contents