Mixer Operation, Mixer Component Identification

MIXER OPERATION.

This machine is only for professional use by suitably trained persons. Ensure operators have read and understood this manual and have received adequate training.

FIGURE 2. MIXER COMPONENT IDENTIFICATION.

Refer to Figure 2 for the mixer component identification.

•Thoroughly clean the bowl and agitator as described in the cleaning section.

•Ensure the mixer is switched off.

•Ensure the guard is fitted to the hub if an attachment is not in use.

•Lower bowl support by using the bowl lift handle.

•Place the required agitator in the bowl and lift bowl onto the bowl support.

•Position the bowl by aligning the pin on the back of the bowl with the retainer situated on the bowl support. Engage the alignment pins on the bowl support into the bowl ‘ears’, and secure in place with the hinged bowl clamps.

•Slide the agitators onto the agitator shaft turning clockwise to engage the drive pin in the “L” slot.

•Add ingredients to the bowl.

•Place the guard on top of the bowl and raise the bowl using the bowl lift handle. (NOTE: An electrical interlock prevents the mixer starting if the bowl support and guard are not in the normal operating position.)

– 11 –

N50 MIXER specifications

The Hobart N50 mixer is a prominent choice for commercial kitchens that demand efficiency and reliability in their food preparation processes. Known for its durability and performance, the N50 mixer is a staple in bakeries, restaurants, and catering operations, designed to handle various mixing tasks with ease.

One of the primary features of the Hobart N50 mixer is its powerful motor, rated at 1/2 horsepower, which ensures consistent and thorough mixing of ingredients. This robust motor allows the mixer to handle dense doughs and large batches without compromising performance. The N50 is equipped with a gear-driven transmission that provides a range of mixing speeds, allowing operators to select the perfect speed for their specific tasks, from slow and gentle mixing to faster, more vigorous blending.

The N50's 5-quart stainless steel bowl is designed for maximum capacity and efficiency. This spacious bowl is ideal for a variety of recipes, from small quantities of frosting to larger batches of dough. The stainless steel construction not only provides durability but also makes it easy to clean, a significant consideration in any busy kitchen environment.

Another notable aspect of the Hobart N50 mixer is its user-friendly design. The mixer features a simple, ergonomic control panel that allows for easy operation. The bowl can be raised and lowered with a single lever, providing convenient access for adding ingredients or removing the finished product. Additionally, the mixer includes a clear and intuitive speed control knob, facilitating quick adjustments while mixing.

The N50 is equipped with various attachments that expand its versatility. The standard equipment includes a flat beater, wire whip, and dough hook, enabling the mixer to tackle a wide range of culinary tasks. Optional accessories are available, allowing operators to customize their mixer to suit their specific needs, whether they're whipping cream, kneading dough, or preparing batter.

Hobart is recognized for integrating advanced technologies into their equipment, and the N50 mixer is no exception. The mixer is designed with safety features, such as a safety overload switch that prevents damage from unnecessary strain, ensuring longevity and reliability.

In conclusion, the Hobart N50 mixer stands out with its powerful motor, durable construction, user-friendly features, and versatility for various culinary tasks. It’s an essential tool that combines superior performance with thoughtful technology, making it a trusted choice for foodservice professionals worldwide.