Hobart ML-124066, ML-124068, HQC90, HQCF45 Defrost, Chilling but only if operating in Holding mode

DEFROST

MAIN MENU	08:05:01	NOTE: DEFROST starts automatically after 6 hours of
		chilling but only if operating in Holding mode.
BY TEMP	BY PROD
BY TIME
	MORE	MAIN MENU	08:06:01
		HOLD PROD	PRINT
		DEFROST	SETUP
		BACK

READY TO DEFROST

REMOVE FOOD

CANCEL START

DEFROSTING COIL 12°F

TIME REMAINING 19:52

EXIT

DEFROST

NOT REQUIRED

From the Main Menu, select MORE and DEFROST.

•To begin Defrosting, remove food and select START.

(CANCEL returns to the Main Menu.)

•The DEFROST cycle runs 20 minutes or until the Coil Temperature reaches 50°F.

(EXIT returns to the Main Menu.)

•If DEFROST NOT REQUIRED is displayed, return to Main Menu is automatic.

PRINT — Once a chill cycle is done, data can be printed.

MAIN MENU 08:05:01

BY TEMP BY PROD

BY TIME

MORE MAIN MENU 08:06:01

HOLD PROD PRINT

DEFROST SETUP

BACK

PRINT CYCLE #____

PROBE #_ MM/DD HH:mm→

←BACK SELECT NEXT→

MAIN MENU		PRINT
PRINT	PROBE	#_
		RECORD
		LABEL
NONE		BOTH

From the Main Menu, select MORE and PRINT.

•The last chill cycle displays Probe # (if BY TEMP), MM/DD (= month/day), and HH:mm (= hour:minute). Probe # will not display if the chill cycle was BY TIME.

•Select the Cycle you want to print by pressing ← (for previous) and → (for next).

•Press PRINT.

(MAIN returns to the Main Menu.)

•To print, select RECORD, LABEL or BOTH. After printing, the display returns to the Main Menu.

(NONE returns to the Main Menu.)

– 18 –