Hobart ML-124068, HQC90, HQCF45, ML-124066, ML-124067 manual Uncrating, Legs or Casters

Page 5

INSTALLATION

Before installing, check the electrical service to make sure it agrees with the electrical specifications on the rating plate located inside the cabinet.

UNCRATING

Immediately after unpacking, check for possible shipping damage. If the chiller is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.

DO NOT LAY THE CHILLER ON ITS FRONT, BACK OR SIDES. EXERCISE EXTREME CARE WHEN REMOVING THE CRATE BOTTOM ESPECIALLY WHEN THE LAST SHIPPING BOLT IS REMOVED. CABINET MUST BE PROPERLY BLOCKED AND STABLE.

Cabinet is bolted onto a wood shipping base from underneath using the Threaded Hole (Fig.1). Remove shipping bolts.

LEGS OR CASTERS

The HQC45, HQCF45 and HQC90 must be installed with legs or casters.

WARNING: THE CABINET MUST BE BLOCKED AND STABLE BEFORE INSTALLING THE LEGS OR CASTERS.

Legs (Optional)

To install the legs, raise up and block the cabinet a minimum of 7" from the floor and thread the legs into the threaded holes on the bottom of the cabinet.

The chiller must be level to operate properly. Turn the adjustable feet in or out as required to level the chiller front-to-back and side-to-side (Fig. 1).

Casters (Optional)

Casters may be supplied for use on self-contained units. The swivel casters with brake should be installed in front; casters without brake, in rear (Fig. 2). Caster equipped chillers should be located on a level floor.

PL-50909

Fig. 1

Fig. 2

– 5 –

Page 4 Page 6
Image 5
Page 4 Page 6
Contents HQC45 & HQC90 Quickchillers HQCF45 QUICKCHILLER-FREEZER Table of Contents Glossary Communication with SmartChill General Legs or Casters UncratingLocation FeaturesElectrical Connections Installation of Remote Alarm OptionalInstallation Checkout START-UP Over TemperatureControls Fig Adhesive-Backed Label Stock for Optional Label Printer When Power is Restored After a Power InterruptionPrinter Supplies Main Menu Series By Temp Factory Preset RangeHolding If all probes are ‘done,’Display goes to By Time Timer counts down until cycle is done Print None Record Printing Please Wait Main Menu Select Follow the cycle run information on pages 12 Beginning atProduct List Exit Defrost Chilling but only if operating in Holding modeProducts SetupUsers SYS PAR Clock Access the Sys Par 1 menu as shown onLogging ProbesTemps in F Remote Alarm Access the Sys Par 2 menu as shown onFrom Sys Par 2, select Alarms AlarmsChill ModeSoft Chill Editor Freeze Buzzer FAC PresetsGlossary On a PC, the screen at left displays Communication with SmartChillDuring communication with the SmartChill program Error Messages CleaningMaintenance Program Condenser Coil

ML-124067, ML-124066, HQCF45, HQC90, ML-124068 specifications

Hobart is known for its commitment to quality and innovation in the commercial kitchen equipment market. Among its extensive product lineup, models such as ML-124068, HQC90, HQCF45, ML-124066, and ML-124067 stand out for their unique features and advanced technologies, catering to the diverse needs of foodservice professionals.

The Hobart ML-124068 is a highly efficient mixer designed to handle large batches of dough and batter. Its robust construction ensures durability, while the patented planetary mixing action offers superior mixing consistency. This model features variable speed settings allowing chefs to customize the mixing process, making it ideal for bakeries and restaurants focused on high-output production.

The HQC90 is a versatile convection oven built to maximize cooking efficiency. With its precise temperature control and even heat distribution, this oven ensures that food is cooked evenly and retains its flavor and moisture. The model is equipped with advanced digital controls that simplify the cooking process, making it user-friendly for kitchen staff of all skill levels. Its compact design makes it suitable for kitchens with limited space, without compromising on performance.

Moving to food preparation, the Hobart HQCF45 is a commercial food processor that combines power and speed. Its powerful motor and robust blade systems enable quick chopping, slicing, and grating, significantly reducing prep time. The HQCF45 features easily adjustable settings, allowing operators to switch between various food types seamlessly, thus enhancing productivity in high-volume environments.

The ML-124066 is an exemplary model of a food mixer with enhanced safety features. It includes a safety interlock system that prevents the mixer from operating unless the bowl and guard are properly locked in place. This mixer also has a variety of bowl sizes available, making it flexible for different quantities of ingredients. With its stainless steel construction, the ML-124066 guarantees long-lasting performance and easy maintenance.

Lastly, the ML-124067 serves as a powerful addition to Hobart's mixer range, offering features that support both small and large establishments. It incorporates an ergonomic design, making it user-friendly and easy to operate even in busy kitchen environments. The model boasts an energy-efficient motor, contributing to lower electricity costs, while also maintaining high-performance standards.

In conclusion, the Hobart ML-124068, HQC90, HQCF45, ML-124066, and ML-124067 represent the pinnacle of efficiency, safety, and versatility in commercial kitchen equipment. Each model, with its unique features and technologies, is specifically engineered to enhance productivity and meet the rigorous demands of today's foodservice industry.
Top Page Image Contents