User Maintenance Instructions

This appliance requires little maintenance. It contains no user service- able parts. Do not try to repair it yourself. Contact a qualified appliance repair technician if the product requires servicing.

CAUTION: To avoid accidental burns, allow the Contact Roaster to cool thoroughly before cleaning.

1.Before cleaning, unplug the Contact Roaster from the wall outlet and allow to cool for approximately 30 minutes.

2.Inside cleaning: Place the Drip Tray under the front of the Contact Roaster. Wipe the plates with absorbent paper towel or a sponge. Run off will drip into the Drip Tray. If necessary, use plastic or wood- en utensils to scrape off any excess fat or food particles.

3.Stubborn build-up:Use a non-metallic scrubbing pad to clean the plates.

4.Empty the Drip Tray. Wash Baking Pan and Drip Tray in warm, soapy water. Rinse and dry thoroughly.

5.Outside cleaning: Wipe with a warm, damp sponge and dry with a soft, dry cloth.

6.Do not use steel wool, scouring pads, or abrasive cleaners on any part of the Contact Roaster.

7.DO NOT IMMERSE IN WATER OR OTHER LIQUID.

8.Make sure to hold the top cover (Lid) by hand while cleaning to pre- vent accidental closing and injury.

9.Store the cord by wrapping around Cord Wrap Area only when Contact Roaster is fully cooled.