Xantech MRAUDIO8X8 quick start Speakers

Page 15

MRC88 / MRAUDIO8X8 QUICK START GUIDE

15

SPEAKERS

Head End Connections

Use the included 4-conductor plug-in connectors, (6 included) to connect speaker wires to the MRC88.

1.Strip each speaker wire conductor’s insulation back about ¼ inch (6mm) and twist the ends to prevent fraying.

2.Insert the leads into the appropriate “L+, L-”/“R+,R-” Terminals on each plug-in connector. Confirm polarity. Slightly pull the connected wire to confirm connection.

3.Be sure there are no loose strands that can cause shorts.

4.Plug the connector into the appropriate Zone Speaker Terminal.

5.Repeat for all zones.

Zone Connections

Prior to connecting speakers, be sure ceiling/wall openings have been properly prepared and that any required mounting hardware is in place.

1.Strip each speaker wire conductor’s insulation back about ¼ inch (6mm) and twist the ends to prevent fraying.

2.Connect the leads to the appropriate “L+, L-”/“R+,R-” Terminals on each speaker. Confirm polarity. Slightly pull the connected wire to confirm connection.

3.Be sure there are no loose strands that can cause shorts.

4.Install speakers per manufacturer’s instructions.

5.Repeat for all speakers in all zones.

Figure 12 – Zone Speaker Connections

08905142A

Page 14 Page 16
Image 15
Page 14 Page 16
Contents MRC88 MRAUDIO8X8 Table of Contents About the MRC88/MRAUDIO8X8 Quick Start Guide Read this FirstTypical MRC88 System Controller Location System PlanningKeypad Location Mounting the KeypadKeypad Cable Length Speaker Wire Length/Gauge Speaker Wire LengthMRC88 Zone Video Cable Length Video Display Cable Length MRC88Preparation Wiring Incorrect wiring on this cable can destroy the MRC KeypadTerminating the CAT5 Cables AC Power MRAUDIO8X8 Audio Only Source ConnectionsIR Emitters Keypads Zone ConnectionsSpeakers Video Display MRC88 OUT-OF-BOX System Functionality System InitializationMRC88 Keypad Default Functionality System Default SettingsMRC88 Default Audio and Code Group Settings Trim Audio Adjustments Z-Adjust Installer SettingsZone Audio Adjustments Restore System Default Settings Software InstallationProgramming Universal Dragon Who Am I/MRC WHO AMFirmware Upgrade Options Warm Upgrade Warm Firmware UpgradeCold Upgrade Cold Firmware UpgradeStarting a NEW MRC88 / MRAUDIO8X8 Project Programming Source IR Commands Configuring the Source IconsRepeat Steps 4-9 for all Sources Tuning Devices AM/FM, Sat, Cable, XM, Sirius, etcTest IR Commands Punch System Punch System Copy IR Programming to all ZonesTransfer the Project Save Project Saving the ProjectAdvanced Programming Project RecoveryFile Menu, select Base Unit Project Recovery MRC88 Save Project ASAppendix MRC88 Front Panel Features and Connections08905142A MRC88 Rear Panel Features and Connections 08905142A MRC88 Keypad Feature Descriptions 08905142A MRC88 Keypad Rear Panel Features and Connections Certifications Page Page 08905142A

MRAUDIO8X8 specifications

The Xantech MRAUDIO8X8 is a powerful and versatile audio routing solution designed to meet the demands of modern multi-room audio systems. This professional-grade matrix audio router allows users to manage and distribute audio signals efficiently across eight zones, providing unparalleled flexibility and control for both residential and commercial installations.

One of the standout features of the MRAUDIO8X8 is its eight input and eight output configuration, enabling the simultaneous routing of multiple audio sources to various output zones. This flexibility means that different rooms can enjoy different audio sources at the same time—from streaming music, TV audio, to local media players—ensuring every listener can experience their preferred sound without conflict.

The MRAUDIO8X8 utilizes advanced technology to enhance audio quality and ensure reliable performance. With support for both analog and digital audio sources, this matrix router accommodates a wide range of audio formats. It features XLR, RCA, and optical connections, making it compatible with a myriad of devices. The robust built-in DSP (Digital Signal Processing) capabilities allow users to customize sound characteristics per room or zone, offering options for equalization, dynamic range, and other modifications that enhance the listening experience.

Installation and setup of the MRAUDIO8X8 are intuitive and efficient, thanks to the user-friendly interface. Each zone can be controlled via an intuitive web-based interface or compatible control systems, providing easy access to customization features. Additionally, it supports various third-party control solutions, including popular platforms like Crestron and Control4, ensuring seamless integration into existing smart home systems.

Another significant characteristic of the MRAUDIO8X8 is its scalability. As audio distribution needs grow, the matrix router can integrate with Xantech's other products, such as amplifiers and touchscreen controllers, creating a comprehensive audio solution for expansive setups.

In terms of build quality, the MRAUDIO8X8 is designed to withstand the rigors of daily use, featuring a durable chassis that ensures longevity. Its compact form factor allows for straightforward rack mounting, making it an excellent choice for commercial applications that need reliable performance without taking up excessive space.

Overall, the Xantech MRAUDIO8X8 stands out as a premier solution for audio routing, equipped with a broad feature set, advanced technology, and superior build quality, making it ideal for those looking to create premium multi-room audio experiences.
Top Page Image Contents