Xantech MRAUDIO8X8 quick start Save Project AS, Project Recovery, Advanced Programming

Page 33

MRC88 / MRAUDIO8X8 QUICK START GUIDE

33

SAVE PROJECT AS

When programming a project for a new client that is similar or identical to an existing project, Open the existing project. In the File Menu select Save As, then enter the new file name as described in Step 4 above. The project will be saved with the new file name. At this point, the project can be transferred to the Controller if no additional changes are required, or after making the necessary changes for the new client.

PROJECT RECOVERY

1.In the File Menu, select Base Unit -> Project Recovery -> MRC88.

2.Universal Dragon will extract the project from the MRC88.

3.If the message: ‘Error recovering project.’ displays in the Project Recovery Window, check connection between PC and MRC88. Confirm Com Port. See: MRC88/MRAUDIO8X8 Installation Instructions/Troubleshooting, (Page 92) for additional information.

Figure 26 – Project Recovery

ADVANCED PROGRAMMING

For complete advanced feature programming instructions, see:

MRC88/MRAUDIO8X8 Installation Instructions/Pre-Programming the MRC88, (Page 34) and Programming the Controller, (Page 47).

08905142A

Image 33

Contents MRC88 MRAUDIO8X8 Table of Contents About the MRC88/MRAUDIO8X8 Quick Start Guide Read this FirstTypical MRC88 System Controller Location System PlanningKeypad Location Mounting the KeypadKeypad Cable Length Speaker Wire Length/Gauge Speaker Wire LengthMRC88 Zone Video Cable Length Video Display Cable Length MRC88Preparation Wiring Incorrect wiring on this cable can destroy the MRC KeypadTerminating the CAT5 Cables AC Power MRAUDIO8X8 Audio Only Source ConnectionsIR Emitters Keypads Zone ConnectionsSpeakers Video Display MRC88 OUT-OF-BOX System Functionality System InitializationMRC88 Keypad Default Functionality System Default SettingsMRC88 Default Audio and Code Group Settings Trim Audio Adjustments Z-Adjust Installer SettingsZone Audio Adjustments Restore System Default Settings Software InstallationProgramming Universal Dragon Who Am I/MRC WHO AMFirmware Upgrade Options Warm Upgrade Warm Firmware UpgradeCold Upgrade Cold Firmware UpgradeStarting a NEW MRC88 / MRAUDIO8X8 Project Programming Source IR Commands Configuring the Source IconsRepeat Steps 4-9 for all Sources Tuning Devices AM/FM, Sat, Cable, XM, Sirius, etcTest IR Commands Punch System Punch System Copy IR Programming to all ZonesTransfer the Project Save Project Saving the ProjectFile Menu, select Base Unit Project Recovery MRC88 Project RecoverySave Project AS Advanced ProgrammingAppendix MRC88 Front Panel Features and Connections08905142A MRC88 Rear Panel Features and Connections 08905142A MRC88 Keypad Feature Descriptions 08905142A MRC88 Keypad Rear Panel Features and Connections Certifications Page Page 08905142A