MRC88 / MRAUDIO8X8 QUICK START GUIDE | 30 |
PUNCH SYSTEM (Copy IR Programming to all Zones)
Once the IR programming for Zone 1 has been confirmed, if all zones are to have the same programming, the Zone 1 Keypad can be ‘punched’ or copied to all zones saving valuable programming time.
Figure 23 – Punch System
1.With Zone 1 (the programmed zone) selected in the MRC88 Window, right click any button.
2.Select Punch (System). A Punch System Level Caution Message will appear. Click YES. All programming for Zone 1 will now be punched to all zones.
3.Test all zones to confirm programming as described in Section: Test IR Commands, (Page 29) in this Guide.
08905142A