Wegener Communications DVR395, DVR396 manual LED & ALARM/WARNING Conditions

Page 19

Page 19

Table 5. Front Panel Controls and Indicator

Item

Description

IRD Status

A Red/Green/Amber LED used to show operating status, including

 

normal operation, warnings, and alarms. See Table 6 (Page 20).

On Screen

On Screen Display of IRD may be activated by pressing the <SELECT>

Display (OSD)

front panel push-button switch. See Section 3.2 (Page 23).

Select

Push button activates OSD and selects options displayed.

 

 

Enter

Push button enters options selected on OSD.

 

 

2.4LED & ALARM/WARNING CONDITIONS

The unit's only LED is RED/GREEN/AMBER, located on the front panel, and labeled Status. The LED's behavior is described in the following table, which includes a list of warning, alarm, and boot fail conditions.

Page 19 of 30

DVR395/DVR396-002

Image 19
Contents Wegener R Communications Digital Video ReceiverThis Page Intentionally Left Blank DVR395/DVR396-002 Warranty This Page Intentionally Left Blank DVR395/DVR396-002 Other Viewing Methods Table of ContentsAbout this Manual Cross-referencesThis Page Intentionally Left Blank DVR395/DVR396-002 Table of Contents List of Tables List of IllustrationsList of Cautions & Warnings Physical Environment Section General InformationIntroduction Unpacking and InspectionElevated Operating Ambient Equipment Specifications ParameterRear Panel Connections Ferrite Bead Installation For DVR396Connector Ferrite Size Ferrite InstallationRearDVR396 Panel DVR395 Rear PanelSecurity Labels DVR395/DVR396 Interconnect Descriptions Signal ConnectorRJ-12 DB-9 Female DB-25 Male PIN Signal TX Data RX Data GroundSerial Port DVR395 Serial Cables To Terminal or PrinterManuals To return a product for serviceService@wegener.com Technical SupportControl DIP Switch Functions Mode Setup Functions Section Power on ProceduresControl DIP Switches Front Panel Controls and IndicatorsDVR395 Front Panel Front Panel Controls and Indicator Description LED & ALARM/WARNING ConditionsGreen LED Indications Mode Condition Status LEDRED AmberWelcome Banner Power on ProcedureThis Page Intentionally Left Blank DVR395/DVR396-002 On Screen Display OSD Section SetupSelect And Enter Key Functions Transport Customizing Settings for Your SystemFor Carrier Select Carrier SelectFor Carrier Status For Signal StrengthFor Serial Port Select Software Select For Software VersionAppendix a RMA Request Form Service@wegener.com Date of Change Rev Level Description of Change Record of RevisionsEmail service@wegener.com