Page 25
For Carrier Status:
•From the Main Menu, select “Carrier Status.”
•Press <ENTER> to display the “Carrier Status” screen.
•This is a
•Press <ENTER> to Return to the Main Menu.
For Signal Strength:
CARRIER STATUS
Acquisition Mode: | INSTALL |
Carrier (MHz): | 12000.00 |
Data Rate (Mbps): | 5.000 |
FEC Rate: | 1/2 |
Tag Site: | 0 |
MP56 Mode: | 0 |
AVG. Eb/No (dB): | 8.0 dB |
Current Eb/No dB: | 8.5 dB |
Return To Main Menu
•From the Main Menu, select “Signal Strength” and Press <ENTER> to display this screen
•Displays signal level. The upper bar is the signal strength. The lower bar gives a higher resolution of and deviation from the selected value.
•To use the lower bar, select “Calibrate” and Press <ENTER>.
•To exit this screen, select “Return To Main Menu” and press <ENTER>.
SIGNAL STRENGTH
l l l l l l l l l l l l l l l l l
|
|
|
|
l | ^ | l | |
Calibrate
Return To Main Menu
For Serial Port Select:
•From the Main Menu, select “Serial Port Select” and Press <ENTER> .
•Use <ENTER> to scroll the possible devices.
•When the desired device is displayed, press <SELECT> to highlight “Activate Selection.”
•Press <ENTER> to save the change and exit this menu.
SERIAL PORT SELECT
Device: Printer
Activate Selection
Return To Main Menu
•To exit without saving the changes, select “Return To Main Menu” and Press <ENTER>.
Page 25 of 30 |