Personalizing Your SKYFi3 | Using SKYFi3 and Your PC |
Erase Memory
To erase all internal memory on your SKYFi3:
1.Press the Menu button, scroll to “Settings” and press the Play/Pause button to select it.
2.Scroll to “Setup” and press the Play/Pause button to select it.
3.Scroll to “Erase Memory” and press the Play/Pause button to select it.
4.Scroll to the desired device to format and press the Play/Pause button to select it.
Caution: Depending on your selection, ALL stored XM content and digital audio files on your SKYFi3 and/or MicroSD card will be erased.
Resetting Factory Defaults
You can return your SKYFi3 to the state it was shipped from the factory. Be careful: this will erase all settings, including StockTicker, Info Extras, presets, display options, and audio options.
1.Press the Menu button, scroll to “Settings” and press the Play/Pause button to select it.
2.Scroll to “Setup” and press the Play/Pause button to select it.
3.Scroll to “Set Defaults” and press the Play/Pause button to select it.
4.Select “Restore Setting Only” to restore to factory settings. Select “Re-
store and Erase” to restore settings and erase stored information. Press
50the Play/Pause button to confirm your selection.
Using SKYFi3 and Your PC
System Requirements
In order to use XM+Napster and the Firmware UpdateTool, the minimum system requirements are:
•Intel®
•Microsoft® Windows® XP Home SP2, Windows XP Professional SP2, or Windows 2000 SP4 operating system*
•At least 64 MB of RAM
•At least 13 MB of available hard disk space for XM+Napster application
•Internet Explorer 5.1 or higher
•Windows Media® Player 9 or higher; Windows Media Player 10 recom- mended for Windows XP
•Active Internet connection; we recommend a broadband (cable, DSL, or fiber) connection for optimal performance
You may use your SKYFi3 with a Macintosh® computer equipped with a USB port, however, you will not be able to use XM+Napster to organize your audio files. You will be able to copy files to your SKYFi3 directly from the Macintosh Finder. The instructions that follow are for XM+Napster users.
*Delphi currently does not support the following operating systems: Windows 95, Windows 98, Windows NT, Windows Me
Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United |
|
States and other countries. Microsoft, Windows and Windows Media are either registered trademarks or |
|
trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh is a trademark of | 51 |
Apple Computer, Inc., registered in the U.S. and other countries. |