Personalizing Your SKYFi3 | Personalizing Your SKYFi3 |
Display Settings
Brightness
1.Press the Menu button, scroll to “Settings” and press the Play/Pause button to select it.
2.Scroll to “Preferences” and press the Play/Pause button to select it.
3.Scroll to “Change Display” and press the Play/Pause button to select it.
4.Scroll to “Brightness” and press the Play/Pause button to select it.
5.Select “Brightness” or “Contrast” with the up and down arrow buttons and use the left and right arrow buttons to adjust each.
6.Press the Play/Pause button to confirm your setting.
Backlight Timer
You can change the amount of time that your SKYFi3’s screen backlight remains lit.
1.Press the Menu button, scroll to “Settings” and press the Play/Pause button to select it.
2.Scroll to “Preferences” and press the Play/Pause button to select it.
3.Scroll to “Change Display” and press the Play/Pause button to select it.
4.Scroll to “BacklightTimer” and press the Play/Pause button to select it.
5.Use the up and down arrow buttons to select the desired time period and press the Play/Pause button to confirm your selection.
See the “Getting Started - Display” section (page 7) for additional display
44options.
Audio Settings
EQ Set
You can set the tone quality of your SKYFi3 player to match the type of music you are listening to.
1.Press the Menu button, scroll to “Settings” and press the Play/Pause button to select it.
2.Scroll to “Preferences” and press the Play/Pause button to select it.
3.Scroll to “EQ Set” and press the Play/Pause button to select it.
4.Use the up and down arrow buttons to select the tone type that you prefer and press the Play/Pause button to select it.
FM Audio Level/Line Out Level
Use these settings to change the audio output level that SKYFi3 is transmit- ting to your FM radio, or sending to your stereo when connected to the Line Out jack.
1.Press the Menu button, scroll to “Settings” and press the Play/Pause button to select it.
2.Scroll to “Setup” and press the Play/Pause button to select it.
3.Scroll to “FM Audio Level” (car cradle only) or “Line Out Level” (if con- nected and in the car or home cradle) and press the Play/Pause button to select it.
4.Use the left and right arrow buttons to decrease and increase the audio
output level and press the Play/Pause button to select it. | 45 |