•Do not use outdoors.
•The toaster is not intended to be operated by means of an external timer or separate
•Accessible surfaces of the toaster may get hot during use.
•NOTE: Any plug cut from power supply cord should be disposed of immediately. Inserting any cut off plug into a 13A
•Never use the plug without the fuse cover fitted. Ensure replacement fuse is the same current value as original.
•Replacement fuses should be ASTA approved to BS 1362.
•Do not operate any appliance with a damaged lead or plug, or after the appliance malfunctions, or has been damaged in any manner.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. WARNING: This appliance must be earthed.
SAVE THESE INSTRUCTIONS
Accessible surfaces of the toaster may get hot during use.
IMpORTANT -
BEFORE USING
Your Dualit toaster has patented proheat elements. These elements need to be conditioned before toasting for the very first time. Then continue to toast as per the instructions.
Set the selector switch so ALL the slots are active, with NO bread in the slots, turn the timer all the way round and let it run back to the off position.
Some smoke may vent from the slots, THIS IS NOT A FAULT and is perfectly safe. There may be a slight popping crinkling sound, this is due to heat expansion of the elements and is perfectly normal.
In the interest of improving products, Dualit Ltd. reserves the right to change the product specification without prior notice.
Your toaster is now conditioned and ready for use.
5