Dualit 27169, 47168, 47169, 47171 TROUBLEShOOTING, My Toaster is not wORkINg, GET Uneven TOASTINg

Page 20

TROUBLEShOOTING

my TOASTER IS NOT wORkINg:

Check the toaster is plugged in.

Check if the ‘neon’ is glowing red.

If yes, your elements or ‘selector’ switch may need replacing.

If no, your plug fuse may have blown or your timer may need replacing.

I gET UNEVEN TOASTINg:

Check the selector switch is set for the number of slots being used.

Starting from the left, ensure you have loaded all heated up slots.

The heavy duty proheat elements can take a few moments to reach optimum toasting temperature. preheating the slots prior to inserting your bread will eliminate this. Rotate the ‘timer’ all the way round, let it wind down to the circle indicator then insert your bread into the active slots.

Ensure size and type of bread being toasted is the same.

End elements take a little longer to warm up than centre elements, once toaster is at optimum operating temperature this will no longer occur.

• The timer is noticably slow, unplug and do not use the toaster. Spare timers

are available from www.dualit.com and must be fitted by a qualified electrical engineer.

my TOASTER wObbLES ON my wORk SURFACE:

Use the adjustable foot under the toaster to compensate for uneven surfaces.

20

Image 20
Contents Vario Toaster Toasting Since Contents Do not put a pan on top of the toaster or warming rack Safety pRECAUTIONSWater or other liquid Before Using Accessible surfaces of the toaster may get hot during useDo not use outdoors Your toaster is now conditioned and ready for useKnow Your Toaster Keeps your work surfaces clear of crumbsIlluminates when power on Timer controlled defrost and toastingHeavy duty cast aluminium castings Select number of slices or buns you are toastingAccessories Sold SEpARATELY Toasting TIpS ALwAyS LOADyOUR Slots STARTINg FROm the LeftSetting Up CRUmb TRAy mUST bE in Place DURINg TOASTINgSelector ThREE SliceToasting FURThER RoundsWhen the timer stops wait 20 seconds Toasting Frozen BreadMaking Toasted SANDWIChES SANDwICHCrumb Tray Internals Cleaning & CareCover Castings ThERMAL pROTECTION Device Always unplug the toaster after useResetting ThERMAL Fuse Button on its face Before useREpLACEMENT pARTS Element sparesWires REpLACING ElementsTo remove the base plate Loosen locking nuts onTROUBLEShOOTING My Toaster is not wORkINgGET Uneven TOASTINg My Toaster wObbLES on my wORk SurfaceMy Toast gETS STUCk wHEN I EjECT FROm the Toaster ONE Side of my bREAD is not TOASTINgSmOkE COmINg OUT of the Slots Thermal fuse has been activated. See page17Guarantee Page +44 0 1293 652 Info@dualit.com