Oven Operation
Clock Controlled Oven Cooking
The clock controlled oven cooking featureis used to turn the ovenoffat apresettimeofday or delay the start and then tum off the oven.
The clock must be functioning and set at the correct time of day for this feature to operate correctly.
The feature can be used with either oven cooking or self- cleaning. See page 19 for instructions on delaying the start of a clean cycle.
Setting the Controls
To Start Immediately and Turn Off Automatically:
1.Press the Bake, Convection Bake or Convection Roast pad.
•The indicator word BAKE or ROAST will flash.
•000 and the oven icon [ ] will appear.
•When convection cooking is selected, a fan icon _$ will also appear.
2.Press the Preset (0) pad to set 350°F. (When convection cooking, 325°F will be automatically set.) Or press the appropriate number pads for the desired oven temperature.
3.Press the Cook Time pad. The indicator words COOK TIME will flash and the display will show "0HR:00".
4. Press appropriate numberpads to enter cooking hours and minutes.
Example: If cooking time selected for baking is 2 hours and 30 minutes, the display will show:
5. At the end of the programmed Cook Time, the oven will shut offautomatically, "End" will appearin the display and a beep will be heard four times. Press the Stop/Clear pad.
If the program is not cancelled, there will be one beep every 30 seconds for five minutes. (If you wish to change the beeps at the end of clock controlled cooking, see page 7.)
To Delay the Start and Turn Off Automatically:
5. Press the Stop Time pad. Indicator words STOP and TIME will flash. Display will show the calculated stop time based on the current time of day and the cook time that you entered previously.
6. Press the appropriatepads to enter the time you wish the oven to stop. A stop time can only be accepted for later in the day.
Example: If at 10:00 you set the oven for 350°E and 2
hours and 30 minutes of cooking time, the calculated stop time would be "12:30".
If you want the stop time to be 1:00, press the number pads "1,0,0". Four seconds later, the display will show 1:00 along with the indicator words DELAY, STOP TIME.