Marmitek manual Sample 1. Program the Marmitek X10 address E4, MICROMODULE AWM2

Page 9

For programming the Marmitek X10 address and options you will be able to use any Marmitek X10 controller or remote control. For the following explanation we used a Marmitek 8-in-1 remote control to program the preferred settings (When you use an RF remote control like the Marmitek 8-in-1, then a TM13 Plug-in Transceiver is required to convert the RF signals to the X10 commands on the power line).

Sample 1. Program the Marmitek X10 address E4:

•Setup your remote control (see manual 8-in-1) and the TM13 transceiver to house code E.

•Start with the MicroModule in setup mode.

•Press the Marmitek X10 button (marked with the symbol of a house) of the 8-in-1 remote control and then press button 4.

•Press the "ON" button 2x (= channel+).

•The MicroModule responds by blinking the LED twice.

•The address E4 is programmed.

Sample 2. Program the function "All Units Off"

•Make sure you program the required Marmitek X10 address first!! (e.g. E4).

•Leave the remote control and the TM13 Transceiver on HouseCode E or set it to the right HouseCode.

•Start with the MicroModule in setup mode.

•Press button marked with "All Units Off" 2x (= mute).

•The MicroModule responds by blinking the LED 8x.

NOTES:

•When you program the MicroModule, always program the address first the optional function second.

•If the MicroModule receives a new address during setup mode, the optional functions will be automatically reset to the factory defaults.

MICROMODULE AWM2

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents MicroModule AWM2 AWM2-201201with a built-inappliance module Marmitek X10 transmitter for 2 addressesMicroModule AWM2 appliance module Applications Marmitek MicroModule AWM2Functions MICROMODULE AWM2Description of the Marmitek MicroModule wires Color code wire connectionsBlue Neutral 0 wire Red Input 2, second address1.Neutral 2.Phase Mounting InstructionsMICROMODULE AWM2 Phase Load Neutral BlueBrown Exit setup mode Activate the setup modeProgramming MICROMODULE AWM2defaults CommandFactory ProgrammableSample 1. Program the Marmitek X10 address E4 Sample 2. Program the function All Units OffMICROMODULE AWM2 Technical specifications Gerätemodul Anwendungen Marmitek MicroModul AWMFunktionen MICROMODULE AWM2Blau gemeinsme Null Farbcode der AnschlussdrähteRot Eingang 2, erstfolgende Adresse Null Phase Schaltkabel. Auf dieses Kabel ist dieEinbau Belastung angeschlossenNehmen Sie den Schalter aus dem Einbaurahmen Programmieren Aktivieren ProgrammierstandMICROMODULE AWM2 Aktivieren und aufheben des Programmierstandes Aufheben ProgrammierstandProgrammiern der Adresse und der Optionen BefehlBeispiel des Programmierens der Adresse E4 AchtungMICROMODULE AWM2 Technische Angaben apparaatmodule Toepassingen Marmitek MicroModule AWMFuncties MICROMODULE AWM2Blauw gemeenschappelijke 0 draad Kleurcode aansluitdradenInbouw/montage Rood Ingang 2, eerst opeenvolgend adres1.Nul 2.Fase MICROMODULE AWM2Rood Activeren programeerstand ProgrammerenOpheffen programeerstand MICROMODULE AWM2Programmeren van de het adres en de opties CommandoVoorbeeld van het programmeren van het adres E4 Let opMICROMODULE AWM2 Technische gegevens MICROMODULE AWM2
Top Page Image Contents