Marmitek manual Programming, Activate the setup mode, Exit setup mode, MICROMODULE AWM2

Page 7

•Install the wall switch at its original place after the MicroModule is programmed.

Programming

WARNING: DO NOT FORGET TO TURN ON THE MAIN MASTER SWITCH PRIOR TO PROGRAMMING.

Activate the setup mode.

The following steps have to be taken to start the setup procedure for programming the MicroModule:

•Press the setup (prog.) button for at least 3 seconds (see figure 5). The LED should stay on after releasing the setup button.

•Warning! The MicroModule will leave the setup mode if it doesn’t receive any commands within 60 seconds.

Exit setup mode

•Press the setup button once shortly; The red LED will turn off now. You can also wait for at least 60 seconds so that the MicroModule will exit the setup mode automatically.

MICROMODULE AWM2

Image 7

Contents Marmitek X10 transmitter for 2 addresses AWM2-201201MicroModule AWM2 with a built-inappliance moduleMicroModule AWM2 MICROMODULE AWM2 Marmitek MicroModule AWM2appliance module Applications FunctionsRed Input 2, second address Color code wire connectionsDescription of the Marmitek MicroModule wires Blue Neutral 0 wireMounting Instructions 1.Neutral 2.PhaseMICROMODULE AWM2 Blue Phase Load NeutralBrown MICROMODULE AWM2 Activate the setup modeExit setup mode ProgrammingProgrammable Commanddefaults FactorySample 2. Program the function All Units Off Sample 1. Program the Marmitek X10 address E4MICROMODULE AWM2 Technical specifications MICROMODULE AWM2 Marmitek MicroModul AWMGerätemodul Anwendungen FunktionenBlau gemeinsme Null Farbcode der AnschlussdrähteBelastung angeschlossen Null Phase Schaltkabel. Auf dieses Kabel ist dieRot Eingang 2, erstfolgende Adresse EinbauNehmen Sie den Schalter aus dem Einbaurahmen Aktivieren Programmierstand ProgrammierenMICROMODULE AWM2 Befehl Aufheben ProgrammierstandAktivieren und aufheben des Programmierstandes Programmiern der Adresse und der OptionenAchtung Beispiel des Programmierens der Adresse E4MICROMODULE AWM2 Technische Angaben MICROMODULE AWM2 Marmitek MicroModule AWMapparaatmodule Toepassingen FunctiesBlauw gemeenschappelijke 0 draad Kleurcode aansluitdradenMICROMODULE AWM2 Rood Ingang 2, eerst opeenvolgend adresInbouw/montage 1.Nul 2.FaseRood MICROMODULE AWM2 ProgrammerenActiveren programeerstand Opheffen programeerstandProgrammeren van de het adres en de opties CommandoLet op Voorbeeld van het programmeren van het adres E4MICROMODULE AWM2 Technische gegevens MICROMODULE AWM2