Control Lock
The Control Lock turns off and disables all surface cooking areas that are in use at the same time.
The Control Lock avoids unintended use of the surface cooking areas. When the cooktop is locked out, the surface cooking areas cannot be turned on by the cooktop touch controls.
To Lock Cooktop: Touch and hold CONTROL LOCK for
5 seconds. After 5 seconds, CONTROL LOCK will glow red, indicating that the cooktop controls are in the lockout position.
To Unlock Cooktop: Touch and hold CONTROL LOCK for 5 seconds.
Performance Boost Function
This function allows you to increase the heat setting level above the maximum heat setting 9 for 10 minutes or less.
NOTE: Performance boost function is not available on surface cooking area 4.
ACE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B |
|
|
|
|
| D |
| F | |||||
|
| ||||||||||||
Zone 1 |
|
|
|
| Zone 2 |
| Zone 3 | ||||||
A. Surface cooking |
|
| C. Surface cooking |
| E. Surface cooking | ||||||||
area 1 |
|
|
| area 3 |
| area 5 | |||||||
B. Surface cooking |
|
| D. Surface cooking |
| F. Surface cooking | ||||||||
area 2 |
|
|
| area 4 |
| area 6 | |||||||
To Use for Zones 1 and 3:
When a surface cooking area is set to the Performance boost function no other surface cooking areas in that zone can be used. If you attempt to use another surface cooking area in the same zone, “P” and “9” will briefly flash in the display before returning to heat setting level 9. The surface cooking area that was set to the Performance boost function will automatically reset to heat setting level 9.
1.Touch SELECT to turn on desired surface cooking area.
2.Set the surface cooking area heat setting level to 9.
3.Touch the “+” key. “P” will appear in the display.
4.Touch SELECT and the
To Use for Zone 2:
The Performance boost function “P” can only be activated in surface cooking area 3. The pan size used must be smaller than the inner surface cooking area (3) circle.
1.Touch SELECT to turn on surface cooking area.
2.Set the surface cooking area heat setting level to 9.
3.Touch the “+” key. “P” will appear in the display.
4.Touch SELECT and the
NOTE: The Performance boost function may automatically deactivate to keep the internal electronic components of the cooktop from becoming too hot.
Timer
Use the cooking timer to set times up to 99 minutes. The timer is independent of any other control settings.
To Use:
1.Touch TIMER. “00” flashes, and the timer icon lights up in the timer display.
2.Touch the “+” or
If you touch the “+” key, “10 minutes” appears in the display. If you touch the
Touch the “+” key to increase the time in
or
Touch the
3.The timer will start to count down after a few seconds.
To change the time, touch the “Timer” key. When the timer display flashes, reset the time with the “+” or
4.When the countdown is finished, the timer beeps for
10 seconds. “00” and the timer icon flash in the timer display. Touch any key to stop.
NOTE: When the power is restored after an outage, the timer will no longer be running.
7